Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4 Playlist Song — — Artist* Album* Song — Album* Song — — Song — — — Podcast Episode — — Genre* Artist* Album* Song Composer* Album* Song — For example: Searching by Artist name The following example explains how an ARTIST search is performed. Another search mode can be used for the same operation, although the hierarchy differs. 1Press /ESC to activate the search selection mode. 2Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to select the ARTIST search mode, and then press //ENT. PLAYLIST ARTIST ALBUM SONG PODCAST GENRE COMPOSER PLAYLIST 3Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to select the desired Artist, and then press //ENT. 4Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to select the desired Album, and then press //ENT. 5Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to select the desired Song, and then press //ENT. •After pressing and holding //ENT for at least 2 seconds while in each hierarchy (except SONG hierarchy), all songs of the selected hierarchy are played back. •After selecting [ALL] in the search mode with“*”, press and hold //ENT for at least 2 seconds to play back all songs in the iPod or selected search mode. •While in the search mode, if you press and hold /ESC for 2 seconds, or no operation is performed for 10 seconds, the search mode is cancelled. •In the search mode, pressing /SOUND (CDE-9874 Series only) or /AUDIO (CDE-9872 Series only) will return to the previous mode. •Search cannot be made during M.I.X. play. •“NO SONG” will be displayed if there are no songs in the selected playlist in the PLAYLIST search mode. •“NO PODCAST” will be displayed if there is no podcast data in the iPod in the PODCAST search mode. •If “iPod name” stored in the iPod is selected in the desired Playlist search mode, and //ENT is pressed, you can search for all songs in the iPod. Also, if you press and hold //ENT for at least 2 seconds, all songs in the iPod are played back. •Depending on the iPod, podcast search is not supported. •If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to “Direct Search Function” on page 20. Quick Search (CDE-9874 Series only) You can search a song from all songs in the iPod without selecting an album, artist, etc. 1Press and hold /ESC for at least 2 seconds to activate the Quick Search mode. 2Turn the Rotary encoder to select a desired song. The selected song is played back immediately. •Press and hold /ESC for at least 2 seconds in the search mode to cancel. Or, the search mode is cancelled if no operation is performed for 10 seconds. •If many songs are in the iPod, it takes time to search for songs. •If any one of the preset buttons (1 through 6) is pressed in the search mode, a search can be made quickly by skipping to the specified location. For details, refer to “Direct Search Function” on page 20. •This function is inactive during repeat (RPT) playback. Direct Search Function The unit’s direct search function can be used to search for an album, song, etc., more efficiently. In Playlist/Artist/Album/Song/Podcast/ Genre/Composer mode, you can quickly target any song. In the search mode, press any one of the preset buttons (1 through 6) to quickly skip over a designated percent of your song content. Song search example: If there are 100 songs in your iPod, they are divided into 6 groups using percentages (shown below). These groups are assigned to the preset buttons (1 through 6). Example 1: Suppose the song you are searching for is located at around the middle (50%) of your library: press button 4 to jump to the 50th song and turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to find the desired song. Example 2: Suppose the song you are searching for is located near the end (83%) of your library: press button 6 to jump to the 83rd song and turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to find the desired song. All 100 songs (100%) 0% 17% 33% 50% 67% 83% Preset buttons 1 2 3 4 5 6 Songs Firstsong 17th song 33rd song 50th song 67th song 83rd song Select Playlist/Artist/Album/Genre/ Composer Playlist/Artist/Album/Genre/Composer can be easily changed. For example, if you listen to a song from a selected album, the album can be changed. Press 1/AF or 2 to select the desired Playlist/Artist/ Album/Genre/Composer. •If the song search mode was used to select a song, this function is inactive. •If an album is selected during an artist search, other albums by that artist are searchable. •This function is inactive during shuffle (M.I.X.) playback. Random Play Shuffle (M.I.X.) The Shuffle function of the iPod is displayed as M.I.X. on this unit. Shuffle Albums: The songs on each album are played back in pr...
Эта инструкция также подходит к моделям:Плееры - CDE-9874RR (1010.71 kb)
Плееры - CDE-9874R (1010.71 kb)
Плееры - CDE-9872RM (1010.71 kb)
Плееры - CDE-9872RE (1010.71 kb)