Оценок - 5, средний балл: 4.4
(
)
)
|
Фрагмент инструкции
©American Audio® - - TT-Record™ Instruction Manual Page 4 Pocket Record Controls and Features INPUTS, CONTROLS, & FUNCTIONS 1. Built-in microphone “L“channel - A omni condenser microphone is installed into the device as the “L” (left) channel. 2. Built-in microphone “R” channel - A omni condenser microphone is installed into the device as the “R” (right_ channel. 3. Recording indicator LED - This LED will glow during recording. 4. Built-in speaker - A monitor speaker is installed, this speaker will not function when earphones are plugged in. 5. Battery cover - Open the cover and install two AA batteries into the battery compartment. 6. Battery select switch - When primary batteries (or Alkaline batteries) are installed, switch to “1.5V”. When Ni-MH rechargeable batteries are installed switch to “1.2V”. 7. Volume control knob for Audio-in “L” channel. 8. Volume control knob for Audio-in “R” channel. 9. Audio-in “L” channel - This allows audio input of Microphone (M), Guitar (G) or Line In (L). It provides 1.5V power supply. 10. Audio-in “R” channel - This allows audio inputs of Microphone (M), Guitar (G) or Line In (L). It provides 1.5V power supply. 11. Audio-in selector - Use this selector switch to select one of three types of audio input types, Microphone (M), Guitar (G) or Line In (L). ©American Audio® - - TT-Record™ Instruction Manual Page 5 12. Built-in microphone sensitivity selector - Select the sensitivity level of the built-in microphones, High (H) or Low (L), or switch off the built-in microphone (OFF). 13. Key hold switch ON / OFF - Put the switch to the “ON” position to put the key control on hold (stop running), or put the switch in the “OFF” position to release the key control. 14. Earphone jack (stereo) - When an earphone is connected to this jack, the built-in speaker will will not function. 15. Line out port - Use this line out port to connect to amplifier. 16. SD card slot - Load your SD card here. 17. USB socket / DC Power in - Use a USB cable to connect to a computer. You may also use an USB type DC adaptor (DC 5V) to connect to a power outlet (power adaptor is not included). BUTTONS: Record button - Press this button to start recording. Mode/Stop button - Press this button to stop or cancel operations (recording, playback, delete…) Del/A-B loop button - Press this button during playback to indicate a loop starting point (A), then press the button again to indicate the loop end point (B). The music will then play from A to B again and again in a loop until you press the button again to stop. MENU button - Press this button to enter the MENU, press the button again to leave the MENU. Power/Play button - Press the button for 2 seconds to switch the recorder ON and press the button for 2 seconds to switch it OFF. Press the button to start PLAYBACK; pressing the button during playback to pause playback, push it again to continue playback. LEFt/Previous Track/Rewind button - Press this button once to select the previous track; hold down the button to change the track number quickly. Hold down the key during playback to rewind, release the button to stop rewinding and go back to normal playback. right/Next track/fast forward button - Press this button once to select the next track; hold down the button to change the track number quickly. Hold down the key during playback to fast forward, release the button to stop fast forward and go back to normal playback. Vol. up/ up selector button - Press this button during playback to increase the volume level. Press this button to scroll up for item selection when in MENU mode. Vol. down/ down selector button - Press this button while playing to decrease the volume level. Press the button to scroll down for item selection in MENU mode. MODE button control: The MODE button provides additional functions. To acess a MODE function, press the MODE button (the LCD will show MODE) and then press the desired function button immediately to operate the MODE function. Here is a description of the mode functions: Memory selection - Use this function to select the internal flash memory or the SD card memory as your record target and playback source. Pocket Record Controls and Features / / / / / / / ©American Audio® - - TT-Record™ Instruction Manual Page 6 This function will delete your desired tracks With this funtion you can select between Folder 1 or Folder 2 Group number: decrease the selection function Group number: increase the selection function Pocket Record Controls and Features Pocket Record battery install/powering on/off 1. Open the battery cover and install two new AA batteries into the Pocket Record. 2. The Pocket Record works on both primary batteries (and Alkaline batteries) and Ni-MH rechargeable batteries. To use primary batteries, put the battery selector switch to the “1.5V” position; to use Ni-MH rechargeable batteries, select the “1.2V” position of the battery selector switch. 3. Ho...