Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
NOTES: • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, it will not be recognized. • To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the disc to stop before opening the CD door. Never touch the lens when the CD Compartment Door is open. 6 PD5208 O/M.QXD 8/22/01 4:31 PM Page 7 OPERATING INSTRUCTIONS (CONTINUED) CD PAUSE CONTROL 1 2 During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE (. ) button again. Playback stops but the disc continues to spin and the PLAY/PAUSE indicator will blink. Press the PLAY/PAUSE (. ) button again to release Pause and resume normal CD playback. The sound returns and the PLAY/PAUSE indicator will light solid. TO BEGIN PLAYBACK FROM A SPECIFIC TRACK After you insert the disc into the CD player and the total number of tracks appear on the display, you may press either the SKIP/Search or button to select a specific track for playback. 1 When the desired track number appears in the display, press the PLAY/PAUSE (.) button. Playback will begin on the track you selected. 2 FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH ( / ) 1 2 During playback, depress and hold either the SKIP/Search or button to move the CD forward or backward within a track to locate a specific musical passage. The CD will move forward or backward at high speed as long as the buttons are depressed. When you release the SKIP/Search or button, normal playback will resume at that point. 3 During playback, press the SKIP/Search button once to advance the CD to the beginning of the next track. Press the SKIP/ Search button repeatedly to advance the CD to higher numbered tracks. During playback, press the SKIP/Search button once to move the CD back to the beginning of the current track. Press the SKIP/Search button repeatedly to move the CD back to lower numbered tracks. 7 PD5208 O/M.QXD 8/22/01 4:31 PM Page 8 OPERATING INSTRUCTIONS (CONTINUED) REPEAT PLAYBACK To repeat a single track, press the REPEAT button . once; the REPEAT indicator will blink. Press the SKIP/Search or button . to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE (.) button . to begin playback. The specific track you selected will be repeated continuously. 32 1 2 1 To cancel Repeat Playback, press the REPEAT button . until the REPEAT indicator goes out. You can also cancel Repeat Playback by pressing the STOP () button .. 2 1 3 To repeat all of the tracks on a disc continuously, press the REPEAT button . twice; the REPEAT indicator will light solid. Press the PLAY/PAUSE (.) button . to begin repeat play back of all tracks. 2 1 2 PROGRAMMED PLAYBACK The CD player in this unit has a 32 track programmable memory that allows you to program up to 32 tracks on any disc for playback in any desired order. You may program 32 different tracks or you may also program certain tracks to play more than once. To perform programmed playback, proceed as follows: 1 2 3 Slide the FUNCTION switch to the CD position; the POWER indicator will light. Open the CD Compartment Door and insert your disc in the CD player. Close the CD Compartment Door. Wait for the CD player to read the table of contents and display the total number of tracks on the disc. Press the PROGRAM button. “1” will appear and the PROGRAM indicator will blink. PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE. 8 PD5208 O/M.QXD 8/22/01 4:31 PM Page 9 Press the SKIP/Search or button . to select the first track that you wish to program. Example: Track 5. When the desired track number (Track 5) appears in the display, press the PROGRAM button . again, the next program number will then appear in the display. 2 11 4 Press either the SKIP/Search or button . to select the next track you wish to program (Example: Track 8). When Track 8 appears in the display, press the PROGRAM button . again. 2 11 5 Repeat step 5 until you have programmed up to 32 track numbers into the CD Program Memory. After programming up to 32 tracks in the CD Program Memory, press the PLAY/PAUSE (.) button to begin programmed playback. The PROGRAM indicator will light solid and playback will begin on the first track that you programmed. 6 The player will continue to play all of the tracks that you programmed in the order in which you programmed them. When the last programmed track has been played, the player will stop and the display will again show the total number of tracks on the disc. If you wish to play the same programmed tracks again, press the PLAY/PAUSE (.) button ., playback will start on the first track you programmed and will continue until all the programmed tracks have been played. To cancel the Programmed Playback Memory, open the CD compartment, or change the position of the FUNCTION switch .. 2 1 7 OPERATING INSTRUCTIONS (CONTINUED) PROGRAMMED REPEAT 1 2 3 It...