Оценок - 2, средний балл: 4.5 ( )

Производитель: Sony Размер: 1.75 mb Название файла: Язык инструкции:

When your tablet device is sitting in the cradle (sold separately), make sure you have connected the tablet device and the cradle, the cradle and the AC adapter, the AC adapter and the AC power cord (mains lead), and the AC power cord (mains lead) and an AC outlet (wall socket) securely. If you have not turned off your tablet device properly, the controller that controls the power supply may stop due to a failure of the program. Press and hold the power button for about 10 seconds, or press the reset button to force the tablet device to turn off, and then turn on the tablet device again [Details]. When you boot your tablet device from the power off state, it may take some time to boot up. Make sure you have connected your tablet device and the AC adapter, the AC adapter and the AC power cord (mains lead), and the AC power cord (mains lead) and an AC outlet (wall socket) securely. If the temperature of the tablet device rises while using applications, connecting to the Internet, sending/receiving an e-mail, using the built-in camera, playing back videos/music, etc., the battery may not be charged. In this case, shut down the running applications. The battery will begin to charge when the tablet device returns to normal temperature. Charging the battery via a USB port is not supported when your tablet device is connected to a computer or a battery charger. Make sure you have connected your tablet device and the AC adapter, the AC adapter and the AC power cord (mains lead), and the AC power cord (mains lead) and an AC outlet (wall socket) securely. Battery deterioration may occur. Contact the service/support center named in the warranty to replace the battery. The charge indicator blinks slowly (every 1 second) when the remaining battery level is 15% or less. Plug in your tablet device and charge the battery [Details]. The charge indicator does not blink while your tablet device is turning off, even though the remaining battery level is 15% or less. When the charge indicator blinks fast (every 0.5 seconds), your tablet device may be in need of repair. Stop using the tablet device and contact the service/support center named in the warranty. Heat builds up in the tablet device and the AC adapter while the tablet device is in use or being charged. This is normal and should not affect the performance of your tablet device. The tablet device can be shut down for safety when overheated. In this case, use the tablet device in a cool area after the tablet device cools down. If your tablet device becomes abnormally hot, it may be in need of repair. Turn off your tablet device, unplug the AC power cord (mains lead) from the AC adapter, and stop using the tablet device. Contact the service/support center named in the warranty. . Make sure the screen brightness of your tablet device is not set at the lowest level. Make sure the remaining battery level is sufficient. Be careful not to cover the ambient light sensor. Outdoors on a clear day, you may feel the screen is dark. If you have the automatic brightness setting enabled, the brightness of the screen is adjusted automatically according to the surrounding brightness. Tap [ Apps & Widgets] - [ Settings] - [Display] - [Brightness] - [Automatic brightness] in that order to remove the check mark. You may see tiny black points on the LCD screen on rare occasions. This does not indicate a malfunction [Details]. Make sure the Bluetooth function of your tablet device is turned on. Tap [ Apps & Widgets] - [ Settings] - [Bluetooth] in that order, and then slide the [Bluetooth] switch to the [ON] position. Make sure the Bluetooth device you are pairing with is turned on. When you tap [ Apps & Widgets] - [ Settings] - [Bluetooth], and then tap [SEARCH FOR DEVICES] at the top right of the screen, a Bluetooth device may not be found immediately because of the number of devices around your tablet device, the distance, the environment, radio wave propagation. Bring the Bluetooth device you are pairing with as close to your tablet device as possible, and try again. Make sure the Bluetooth device your are pairing with is in discoverable mode. The Bluetooth function of the commercially available Bluetooth device you are pairing with should be turned on and the device should be in discoverable mode. When you disconnect a Bluetooth device you have connected to your tablet device once and connect it again, connect the device after deleting registration by both the Bluetooth device and the tablet device. Your tablet device may slow down when you use it in a hot or cold environment. Use the tablet device in a place with as suitable a temperature as possible. Your tablet device may perform better if you turn off the tablet device, and then turn it on again when the tablet device gets slow or is not performing a...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: