Оценок - , средний балл:
(
)
)
Производитель: Parkside
Размер: 181.79 kb
Название файла: 66e26445-4df0-49d5-8df9-c79b2722fde6.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Children must never be allowed to play with the device. b) Remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury. GB/IE Safety advice Never touch the hot soldering tip or the molten solder. You could suffer burn injuries. Always let the device cool before you replace components on the device, clean it or check its condition. . After use let the soldering gun cool down in air only. Under no circumstances quench the tip in water! . When allowing the device to cool or when taking a break from using it, always stand the device up vertically with the soldering tip at the top. Keep the device away from combustible materials. CAUTION! DANGER OF INJURY! Keep your hands away from the hot workpiece. Avoid contact with the hot soldering tip. . If a dangerous situation arises, pull the mains plug immediately out of the mains socket. CAUTION! DANGER OF POISONING! Do not breathe air contaminated with soldering fumes. When working with the device for long periods do not allow the fumes from soldering to build up. They may be hazardous to health. Always provide adequate ventilation of your working area. In addition, it is recommended that you wear protective gloves, a face mask and a protective apron. Do not eat, drink or smoke in rooms where soldering is carried out. Otherwise your hands may transfer any adhering traces of lead via food or cigarettes into your body. . Always wash your hands immediately after soldering. . Do not dispose of soldering waste with the household rubbish. Soldering waste must disposed of as special waste. GB/IE Safety advice / Use 4. Careful handling and use of electrical power tools a) When not in use always ensure that electrical power tools are kept out of reach of children. Do not let anyone use the device if he or she is not familiar with it or has not read the instructions and advice. Electrical power tools are dangerous when they are used by inexperienced people. b) Look after the device carefully. Check for broken parts or parts that are damaged to the extent they detrimentally affect the functioning of the device. Have any damaged parts repaired before you use the device. Many accidents have their origins in poorly maintained electrical tools. . Original accessories / attachments . Use only the accessories detailed in the operating instructions. The use of attachments or accessories other than those recommended here could lead to you suffering an injury. . Use . Switching on and off Switching on: . Insert the mains plug into a suitable mains socket. Press the ON / OFF switch and keep it pressed. . Maximum switched-on duration: 12 seconds GB/IE 4 Use Switching off: Release the ON / OFF switch 4 . . Pause: At least 48 seconds CAUTION! Never heat up the device if it is not fitted with a soldering tip. . ATTENTION! Never use in continuous operation mode. The flow of electrical current controls the delivery of soldering heat. As soon as the ON / OFF switch 4 is released, the delivery of soldering heat drops. If the ON / OFF switch 4 is pressed again, the delivery of soldering heat rises. Pay particular attention to achieving an even delivery of soldering heat to ensure the highest soldering quali ty. You can do this by not allowing the soldering tip 1 to become excessively hot. Note: The device has a soldering light 3 to illuminate the working area. . Replacing a soldering tip CAUTION! DANGER OF BURNS! Allow the device to cool down before replacing a soldering tip. . Release the two union nuts 2 using the open spanner 9 . Pull the soldering tip 1 or 7 out of the holder. . Insert another tip into the holder. Tighten the two union nuts 2 using the open spanner 9 . GB/IE Maintenance and cleaning / Service centre / Warranty Maintenance and cleaning WARNING! RISK OF INJURY! Before you carry out any work on the device always pull the mains plug out of the mains socket and allow the device to cool. Clean the device after you have finished using it. Use a cloth and a little mild detergent for cleaning the device. . In no circumstances use sharp objects, or petrol, solvents or cleaning agents that might attack plastic. Do not allow any liquids to enter the inside of the device. Service centre WARNING! Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use. WARNING! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or his service centre. This will ensure that your device remains safe to use. Warranty The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warran...