Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
For your own safety, please read this user manual carefully before installing the device. In order to install , operate, and maintain the lighting safety and correctly. We suggest that the installation and operation should be done by the verified technician and follow the instruction strictly. Every person involved with the installation, operation and maintenance of this device has to: -be qualified -follow carefully the instructions of this manual INTRODUCTION: Thank you for having chosen this professional moving head. You will see you have acquired a powerful and versatile device. Unpack the device. Inside the box you should find: 1. One XLR connection cable 2. Two omega clamps 3. One safety rope 4. Manual Please check carefully that there is no damage caused by transportation. Should there be any, consult your dealer and don’t install this device. Features ·Lamp: Philips PLATINUM 15R ·3 DMX Channels mode: 21/23/34 channels ·Stand alone operation with Master/Slave function, sound activated via built in microphone. ·Pan and tilt movement: 8 and 16 bit resolution For smooth and precise motion Movement: Pan: 360°/540°optional, Tilt: 270° Speed of pan/tilt movement adjustable Scan position memory, auto reposition after unexpected movement ·Colors: Basic color wheel with 10 dichroic mirrors, plus white, two direction rainbow effect. ·CMY Variable Color Mixing for Infinite Color Possibilities ·Rotating gobo: 8 rotating gobos plus open, all gobos can be easily replaceable and gobo indexing ·Static gobo wheel with 14 indexing gobos plus open, gobo shaking in different speed ·Prism and prism rotating , with 16 prism macros ·Linear dimmer in precise speed from 0% ~ 100% ·Stepless frost, 0%~100% linear change frost ·Motorized focus 2 --XM542-V1.0-NR ·Iris from 5%~100% with pulse iris effect. ·Zoom: 9°~27° linear zoom ·Strobe/shutter: High speed shutter, 0-13 Hz or random strobe ·Control board with full color LCD graphic display and touch-keyboard ·Auto-program: 7 pre-built programs can be selected. ·Software-upload by optional accessory via DMX line Overview 1) Lens 2) Display 3) Wireless indicator 4) DC Switch 5) Microphone 6) Left-button 7) Down-button 8) Right-button 9) Mode/Esc-button 10)Up-button 11)ENTER-button 12)Handle 13)Lamp bracketrear metal panel 14)3-Pin DMX in 15)3-Pin DMX out 16)5-Pin DMX in 17)5-Pin DMX out 18)Power input 19) Fuse 3 --XM542-V1.0-NR SAFETY INSTRUCTIONS This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising condensation could damage the device. Leave the device switched off until it has reached room temperature. This device falls under protection-class I. Therefore it is essential that the device be earthed. The electric connection must carry out by qualified person. Make sure that the available voltage is not higher than stated at the end of this manual. Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case, replacement of the cable must be done by an authorized dealer. Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord. During initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective, it should decrease gradually. Please don't project the beam onto combustible substances. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. 4 --XM542-V1.0-NR Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep away from children and non-professionals. GENERAL GUIDELINES This device is a lighting effect for professional use on stages, in discotheques, theatres, etc., the device was designed for indoor use only. This fixture is only allowed to be operated with the max alternating current which stated in the technical specifications in the last page of this manual. Lighting effects are not designed for permanent operation. Consistent operation breaks may ensure that the device will serve you for a long time without defects. Do not shake the device.Avoid brute force when installing or operating the device. While choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or dust. Please don't project the beam onto combustible substances.The minimu...