Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
USE A PROPER SOLAR FILTER MOUNTED ON THE FRONT OF TELESCOPE FOR VIEWING THE SUN. WHEN OBSERVING THE SUN. PLACE A DUST CAP OVER YOUR FINDERSCOPE OR REMOVE IT TO PROTECT YOU FROM ACCIDENTAL EXPOSURE. NEVER USE AN EYEPIECE-TYPE SOLAR FILTER AND NEVER USE YOUR TELESCOPE TO PROJECT SUNLIGHT ONTO ANOTHER SURFACE, THE INTERNAL HEAT BUILD-UP WILL DAMAGE THE TELESCOPE OPTICAL ELEMENTS. ntroduction to the SynScanTM The is a instrument that will allow you to easily find and enjoy viewing night sky treasures, such as planets, nebulea, star clusters, galaxies and much more. The hand control allows you to point your telescope at a specific object or even tour the skies at the touch of a button. The user friendly menu system allows automatic slewing to over 13,400 objects. Even an inexperienced astronomer can master its variety of features in a few observing sessions. Below is a brief description of the individual components of the hand controller. the SynScanTM The should be powered by DC power supply (tip-positive) capable of producing continuous current of minimum 2 amps. Correctly plug the power cord into the 12V DC outlet on the the mount (See and b for mount, and for EQ6 mount). Flip the Power Switch to the "on" position to turn on the power. The power indicator will flash the power is low. Continue to use the this point may damage the The power indicator will rapidly when the power is extremely low. Continue to use the same battery may damage the SynScanT" system. Guider switch to power supply power indicator ynScanTM Hand Control SynScanT" hand control cable for the has a RJ-45 connector on both ends. Plug one end into the hand control and the other into the outlet on the mount Push the connector into the outlet until it clicks into place. The cable for the EQ6 mount has a RJ-45 connector on one end and on the other. Plug the RJ-45 connector into the hand control Push the connector into the outlet until it clicks into place. Plug the connector into the outlet on the mount. Tighten the screws to secure the connector in place The RJ-11 6-pin port is used for communications between the and a computer or other devices. (See "Linking with a Computei' for details.) The DC power port allows independent use of the hand control for users who wish to browse the database without connecting to the telescope The DC power port on the hand control is for hand control stand-alone applications only. For telescope applicaions, use the 12V DC outlet on the mount. To connect the to a PC, use only the cable provided with the mount. The Hand Control allows direct access to all the motion controls of the telescope and a database with a range of preset objects. The Hand Control comes with a dual-line, 16 character display screen that is backlit for comfortable viewing of the telescope information and scrolling text. To explore the many functions that the has to offer, Mode keys there are 4 main categories of control on the Hand Control Mode keys Directional keys The mode keys are located near the top, close to the LCD display. They include the ENTER, and SETUP Dual purpose keys ESC key is used to escape from a certain command or to go back a level in the menu tree. ENTER key is used to select the functions and submenus in the menu tree, and to confirm certain functional operations. SETUP key is a quick hot key that takes you to the Setup submenu. Directional keys The directional keys allow complete control of the telescope at almost any step in the operation. These controls are locked out when the telescope is slewing to an object. They are normally used to initially align, center objects in the eyepiece, and manual guiding. The left and right directional keys can also be used to move the text curserwhen entering data to the hand control. Keys The up and down scroll keys allow you to scroll up and down within the menu tree or selections. Dual Purpose keys These keys range from the middle to the bottom of the hand control. They serve two distinct purposes -data entry and quick reference hot keys. TOUR key takes you on a preset tour across the sky you are currently under. RATE key changes the speed rate of the motors when the direction keys are pressed. There are 10 speeds to choose from: (slowest) to 9 (fastest). UTILITY key shows functions such as Show Position, Display Time ...etc. USER key gives access to up to 25 user-defined coordinates. ID key identifies the object the telescope is currently pointing to. NGC, IC, M, PLANET, and OBJECT keys allow direct access to SynScanT" database of over 13,400 objects. Display screen This section provides a step-by-step procedure on how to operate your hand control. tial Setup 1. Perform the Polar alignment using (Northern Hemisphere) the polarscope. 2. Point the telescope roughly to the Zenith North Celestial Pole (or Polaris) if North Pole you are in the Northern Hemisphere. Point to the South Celestial Pole if in Southern Hemisphere. Make sure the counterweight rod is pointed down as seen in Th...
Эта инструкция также подходит к моделям:Оптические приборы - SynScan (555.12 kb)