Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
/ Camarillo, CA 93011 Copyright© 1999 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in an shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353. THANK YOU for choosing a HARBOR FREIGHTTOOLS product. For future reference, please complete thi owner’s record below: Model_ Serial No._ Purchase Date SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin using it. Technical Specifications Tool Name: Binoculars 20 x 60 Item Number: 41491 Magnification: 20X Optics: High Quality Russian Optics Weight: 4.2 Lbs. Also Included: Amber Eyepieces for better twilight viewing Carrying Case ^ IMPORTANT SAFETY INSTRUCTIONS! À READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT! Warning: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that COMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT MUST BE SUPPLIED BY THE OPERATOR. Before Operating Before operating the Binoculars any part that appears damaged should be carefully checked to determine ' at it will operate properly and perform its intended function. Before operating your Binoculars, check for damaged parts. Warning: Never look directly at the Sun as this may cause serious and permanent damage to your e 'es. ( Assembly Your Binoculars come fully assembled. It is important that you read the entire manual to become familiar' ith the unit BEFORE you use it. #41491 Pa le 2 Operation Step 1) With one hand on each side of the binoculars, move the binoculars so that you are seeing through both eyepieces. You should be able to view with both eyes open as you would when seeing normally. Step 2^ Located in-between the eyepieces in the middle of the binoculars is a knurled wheel. This is the focusing mechanism. While holding the binoculars up to your eyes, turn the center focusing mechanism. Turning this mechanism will quickly bring your target into focus. Step 3) For fine-tuning; there is a smaller mechanism located on the right eyepiece tube. Turn this wheel for small adjustments in viewing. Note: The fine-tuning is located on the right eyepiece. The left-hand eyepiece contains no adjusting mechanisms. Maintenance and Storage Step 1) Avoiding the lens, wipe down the body of the binoculars with a soft cloth. Always replace tl lens caps when the Scope is not in use. This will protect the lens from scratches and othe damage resulting from exposure to dust, wind and the elements. This will also protect it if t Binoculars are bumped or dropped. Step 2) Only clean your lens with a non-scratch type cloth. This cloth can be purchased in a camera store. Other rough cloth...
Эта инструкция также подходит к моделям:Оптические приборы - 41491 (85.63 kb)