Оценок - 2, средний балл: 4 ( )

Производитель: iOptron Размер: 574.13 kb Название файла: Язык инструкции:

Step 8. Main Screen Turn on the mount and wait for controller to display “GPS-OK” in top right corner —not “GPS-ON”. GPS provides Latitude, Longitude, and current time only. Step 9. Press the MENU key once. Scroll (with the ^/Ў keys) to “Set Up Controller” Press ENTER. Then go to Set Up Local Time and Site in the next screen. Select and then press ENTER. Step 10. Set Up Local Time Go to: Set up Local Time (or “Local Time and Site”). Press ENTER. Enter date and day-light savings (Y-yes. N-no). (Note: use arrow keys to scroll through screen and select numbers) iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569.0200 | Toll Free (866) 399.4587 | Step 11. Set Up Site GPS will provide the longitude and latitude information. If GPS signal is not available, these values can be manually entered here. Use ^/Ў keys to change the numbers and letters. Use keys to scroll through the fields. The last line of this screen is for setting time zone information (add or subtract 60 minutes (Min.) per time zone). Examples: minutes “behind” UT or “ahead of” UT New York: 300 Min. “behind” UT Los Angeles: 480 Min. “behind” UT Rome: 60 Min. “ahead of” UT Sydney: 600 Min. “ahead of” UT Press ENTER when finished. The mount is now ready to find (GOTO) and track objects. Step 12. Select and Slew to an object Press Menu button. Scroll to “Select and Slew” Press ENTER. Step 13. Select a category (ex. “Planets, Sun, Moon”) by scrolling with the arrow keys. Press ENTER. Then select an object (ex. “Moon”) by scrolling with the arrow keys. Press ENTER. The telescope will automatically slew to the object and lock on. It will automatically begin to track once it locks on to the object. Step 14. Sync to Target (Use this to center and synchronize the object selected in Step 13). Press MENU. Scroll to “Sync. To Target”. Press ENTER. Next use the arrow keys (^Ў<>) to center the object in the eyepiece. Then press ENTER again to synchronize the object with the memory. To slew to other objects simply repeat steps 12 and 13. You do not need to repeat step 14 except for adjustments as needed. (Refer to the full online manual for 1-star and 2-star alignments. Sync to Target is similar to 1-star Alignment except that you choose the object to align to.) iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569.0200 | Toll Free (866) 399.4587 | Flip switch This page shows specific directions for the 80mm Refractor, 114mm Newtonian, and the 90mm Maksutov (depending on which telescope tube your unit may come with). .80mm Refractor (#8602)……..... ................................................ 45. diagonal eyepiece Focus knob Insert 45. diagonal: Insert the diagonal into the eyepiece side of the telescope. Tighten the thumbscrews to a firm feel only. Insert the eyepiece: Slide the eyepiece into the open end of the diagonal. Tighten the thumbscrews to a firm feel only. Remove the dust cover from the other end of optical tube assembly. Use th...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: