Оценок - 2, средний балл: 3 ( )

Производитель: ATN Размер: 921.01 kb Название файла: Язык инструкции:

Each click equals to 1/8 inch at 100 yards. Do not use force having reached the maximum of rotation. USING THE REMOTE CONTROL Below the control box you can find the panel with two screws to fix Aries MK6600/6650/7700/7750/8700/ 8750. To plug in the remote control, remove the screws and the small panel to disclose the inlet. The three remote control buttons’ function similarly to control box buttons. Once the remote control is plugged in you may use both panels to adjust the scope. The remote control can be attached to the weapon of your choice through whatever means best suiting your shooting style and grip. We suggest an elastic Velcro® loop fastener similar to the trigger switches found on the weapon mounted laser pointers. RANGE FINDER The range finder reticle in your Aries MK6600/7700/ 8700 has been designed to assist you in determining the range of your target. These distances are based on a 6’ target. A 6’ target fits between the numbered baseline (the three short horizontal lines just next to the numbers) and the main horizontal line. If the 6’ target fits between the 1 and the right horizontal posts of the main line the target is 100 yards away. If the same target fits between the 2 and the right post of the main line the target is 200 yards away. The same is with the three, the target is 300 yards away. If the “Red on Green” reticule is not perpendicular to the bore of the rifle, it can be adjusted by doing the following: 1. Unscrew the cover between the windage and elevation adjustments. 2. Loosen the flat-head screw about 1/2 - 3/4 of a turn. 3. Rotate the central threaded shaft with two notches as needed (make sure that you do not rotate the round plate mounted on this shaft individually. They will rotate together, but if you move the plate itself, if will interfere with the focus of the reticule). Windage Elevation If a 6` target fits between these two lines then the target is 300 yards away 3 2 1 If a 6` target fits between these two lines then the target is 100 yards away 3 1 2 RETICLE PATTERNS The Aries MK6650/7750/8750 scopes comes with five reticle patterns: • Dot • Post • Post with Dot • Open Cross Hair • Cross Hair You can choose your preferred pattern by pushing the Reticle Pattern Selector button. Aries MK6650MK7750MK8750 Reticle Pattern Selector button 1 MOA 1 MOA 60 MOA 6 MOA 2 MOA 60 MOA 60 MOA 60 MOA 6 MOA Dot 1 MOA 60 MOA 60 MOA 1 MOA Cross Hair Post Post with Dot Open Cross Hair PREPARATION FOR OPERATION Before getting started make sure to follow these steps: • Take the scope out of the case. • Insert the batteries into their housing with the polarity order shown on the main body of the unit. • Switch on your MK6600/6650/7700/7750/8700/8750 scope by the master power switch, make sure the protective lens cover is still attached to the lens. • We expect your right eye to aim through the scope. Keep both of your eyes open so you are able to see the color-coded LEDs with your left eye. • In order to assure the proper functioning of the proximity sensor make certain that the protective glass surface of the sensor is always clean. • When the scope is first powered up the initial settings are: - Light intensifier tube brightness -100% - Reticle brightness -100% - Illuminator brightness -100%. • Observe the scene and adjust the diopter for optimal image clarity. • You may now enter the dark environment or simply shut the lights off in order to darken the room. • Remove the lens cap/daylight filter. • Observe the scene and adjust the front lens for ideal focus. • Adjust the digital features as needed. • To increase the battery life the LED diodes go off after 10 seconds. • You will need to focus for different distances. • Take your time to learn about your “Smart” scope. It will take practice to properly use this device. As you use this scope you will be able to improve your speed of focusing, as well as sharpness of image. • Have fun and enjoy. CLEANING THE EYEPIECE You may need to clean the eyepiece of the riflescope from time to time in order to guarantee top performance. When you receive your riflescope you should check for dust on the eyepiece of the unit. First you will need to remove the eyepiece. To do that you will need to initially loosen the 2 set screws that can be found on the base. Then unscrew the eyepiece counter-clockwise to remove it. NOTE: You do not have to remove...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: