Оценок - 2, средний балл: 4 ( )

Производитель: Petsafe Размер: 1.75 mb Название файла: 400-1247-3.pdf Язык инструкции:

PetSafe® products are specifically designed to make this task simple. It is easy and you should find the point where your dog first perceives the Vibration or the Static Stimulation. See Find the Best Vibration or Static Stimulation Level for Your Pet on page 12. 4. “Good Dog” in the Home or Outside: Stopping unwanted behavior is easy using the PetSafe® Remote Trainers. Your dog can be good in and out of the house. Remember to be fair to the dog and remove temptation whenever possible. Following are some guidelines for teaching basic obedience commands. Teaching Basic Obedience The “Sit” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a long leash. Note: Be sure the extra collar does not put pressure on the Contact Points. 2. Hold your leash and Handheld Transmitter in one hand. To start with Vibration, press and hold the Top Button (light blue) while saying “Sit” and if necessary using your free hand to guide your pet into a “Sit” position. Release the Top Button immediately when your pet sits. Repeat this several times. 3. If your pet sits reliably on receiving the Vibration and the spoken “Sit” command, then training is complete. Release your pet from the “Sit” position and praise him. If not, move on to Step 4 (only on the PDT00-12894 Remote Trainer with Vibration PLUS model). 4. Hold the leash and Handheld Transmitter in one hand. Using the Recognition Level for your pet, press and hold the Middle Button (medium blue on the PDT00-12894 model) to deliver a quick Vibration followed by controlled Static Stimulation, or the Bottom Button (dark blue on the PDT00-12894 model) to deliver a quick on/off Static Stimulation followed by controlled Static Stimulation, while saying “Sit” and if necessary using your free hand to guide your pet into the “Sit” position. Release the button immediately when your pet sits. Repeat this several times. Note: If a Static Stimulation button is held up to 12 continuous seconds, the LED will flash rapidly to indicate a safety time-out. Once released, the button resets to normal functionality. 5. If your pet now sits reliably with the spoken “Sit” command, he may now be ready to respond without Static Stimulation. Take a play break and then go back and repeat from Step 2 with Vibration only. Note: Keep your pet close to you while teaching the “Sit” command. 15 The “Come” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a long leash. Note: Be sure the extra collar does not put pressure on the Contact Points. 2. Hold your leash in one hand and the Handheld Transmitter in the other. 3. Wait for your pet to walk away from you. 4. To start with Vibration, press and hold the Top Button (light blue), while saying “Come” and if necessary use the leash to guide your pet toward you. 5. Immediately release the button as soon as your pet steps toward you, and praise him enthusiastically. 6. Quickly move backwards as your pet begins to come toward you, praising him the entire time. Stop moving backwards and praise your pet when he returns to you. 7. Repeat steps 3 to 6 several times. 8. If your pet comes to you reliably on receiving the spoken “Come” command, then training is complete. Release your pet and praise him. If not, move on to Step 9. 9. Wait for your pet to walk away from you. Using the Recognition Level for your pet, press and hold the Middle Button (medium blue on the PDT00-12894 model) to deliver quick Vibration followed by controlled Static Stimulation, or the Bottom Button (dark blue on the PDT00-12894 model) to deliver a quick on/off Static Stimulation followed by controlled Static Stimulation, while saying “Come” and if necessary use the leash to guide your pet toward you. 10. Immediately release the button as soon as your pet steps toward you, and praise him enthusiastically. Note: If a Static Stimulation button is held up to 12 continuous seconds, the LED will flash rapidly to indicate a safety time-out. Once released, the button resets to normal functionality. 11. Quickly move backwards as your pet begins to come toward you, praising him the entire time. Stop moving backwards and praise your pet when he returns to you. 12. Repeat steps 9 to 11 several times. 13. If your pet now comes to you reliably with the spoken “Come” command, he may now be ready to respond without Static Stimulation. Take a play break and then go back and repeat from Step 3 with Vibration only. 16 Customer Care Center 1-800-732-2677 The “Stay” Command 1. Put a separate, non-metallic collar on your pet’s neck ABOVE the Receiver Collar, and attach a long leash. Note: Be sure the extra collar does not put pressure on the Contact Points. 2. Visibly identify where you want your pet to sit by placing his bed or a large piece of cloth on the ground. 3. Put your pet on his bed. Hold your leash in one hand and the Handheld Transmitter in the other. 4. Staying at approximately 1 yard,...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: