Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Veuillez lire entierement le guide avant l’assemblage. Por favor, lea completamente esta guia antes de ensamblar. Thank you for choosing PetSafe®. The relationship you have with your pet is the focus of everything we do. If you have questions about, or are dissatisfied with, any of our products, please contact the Customer Care Center at 1-888-632-4453 or visit our website at Table of Contents Components ................................................................................................................................... 3 Tools Needed ..................................................................................................................................3 Connect End Rail Clamps, 20" Tubing and Elbows ........................................................................... 4 Connect Plain and Swedged Tubing ................................................................................................. 4 Add Tarp and Secure with Ball Bungees ........................................................................................... 5 Caution .......................................................................................................................................... 6 Terms of Use and Limitation of Liability ..........................................................................................6 Francais .................................................................................................................. 7 Espanol ..................................................................................................................12 1-888-632-4453 Components End Rail Clamp 4 pcs. Plastic Elbow 2 pcs. 41" Tubing (Frame Rail) Swedged on One End 2 pcs. 41.5" Tubing Plain (Frame Rail) 20" Tubing Plain (Upright) 2 pcs. 5/16 x 2" Carriage Bolt with Nut 2 pcs. Assembly Instructions Tarp Ball Bungee Cord 14 pcs. PetSafe ® 10' x 10' E-Z Roof Assembly Instructions Instructions d’assemblage Instrucciones de montaje Please read thisentire guide before assembly. Veuillez lire entierement le guide avant assemblee. Por favor, lea completamente esta guia antes de asamblea. Tools Needed • Adjustable Wrench • Pliers Step 1 Step 2 Connect End Rail Clamps, 20" Tubing and Elbows 1. Gather 4 end rail clamps, 2 - 20" tubes, 2 elbows, 2 carriage bolts and 2 nuts. 2. Insert 1 elbow into 1 - 20" tube. 3. Beginning on the gate panel side, attach 2 end rail clamps to top frame of the kennel panel. Position end rail clamps in the center of the gate panel. 4. Install 20" tube with elbow into end rail clamps and tighten with 1 carriage bolt and 1 nut. 5. Repeat steps 2 through 4 on opposite side of kennel. Loosely secure the end rail clamps to the kennel frame. Connect Plain and Swedged Tubing 1. Gather 1 plain 41.5" tube and 2 swedged 41" tubes. 2. Beginning on the gate panel side, insert one swedged tube into elbow. Then insert plain tube over swedged tube. Finish by inserting remaining swedged tube into plain tube and opposite elbow. 3. Tighten end rail clamps after all tubing is assembled. 1-888-632-4453 5 Add Tarp and Secure with Ball Bungees 1. Gather tarp and 14 ball bungees. 2. Drape long side of tarp over frame. 3. Work on one side of the kennel. Pass the cord through the grommet from the bottom up (A). Pass the cord back through the opening immediately below the ball (B). Pull the end of the cord until the ball is resting tightly against the grommet (C). The ball bungee is now “permanently” attached to the tarp. 4. Wrap cord around the kennel frame and then stretch over the ball to secure (D). Repeat steps 3 and 4 to attach all bungees to the tarp and kennel frame. 5. Once one side of the tarp is secured to the kennel, repeat steps 3 and 4 on the other side. Important: Tarp is not designed to withstand the weight of snow. Remove cover in winter. Anchors are strongly recommended. PetSafe® Anchor Kit sold separately. A B C D Step 3 Caution While this accessory product accompanies a solid barrier, Radio Systems® Corporation CANNOT guarantee that the system will, in all cases, keep a pet within the established boundary. Not all pets can be trained for containment. Therefore, if you have reason to believe that your pet may pose a danger to others or harm himself if he is not kept from exiting the product, you should NOT rely solely upon the PetSafe® dog kennel to contain your pet. Radio Systems Corporation shall NOT be liable for any property damage, economic loss or any consequential damages sustained as a result of any animal exiting the system. If you are unsure whether this is appropriate for your pet, please consult your veterinarian or certified trainer. This product is designed for use with pets only. Terms of Use and Limitation of Liability 1. Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies acc...