Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
This manual will assist you during the assembly of your router table. However, this manual is not intended as an instructional manual for router table usage. Please consult the widely available books, magazines, and classes on router table techniques. Thank you for choosing Bench Dog! QUESTIONS? Bench Dog, Inc. 3310 5th St. NE Minneapolis, MN 55418 612.782.8205 main 612.788.2518 fax 800.786.8902 toll free info@benchdog.com benchdog.com 1-800-786-8902 Be sure to check out our web site for all the latest and greatest accessories and tools. Contents of Box 1 router top 1 phenolic ProPlate 1 32" miter track Hardware 12 7 x 40mm insert plate leveling screws 2 1/4-20 x 1" phil. flat head mach. screws 14 1/4-28 x 1/2" set screws 4 1/4-20 x 2" phil. flat head mach. screws 4 1/4-20 x 2" round head bolts 8 1/4-20 cross dowels 1 4mm hex wrench 2 trim strips 4 #6 x 1/2" screws Requirements Assembly 4mm hex wrench (supplied) 1/8" hex wrench (supplied) screwdriver and power drill Mounting Router drill bit (sized to your router mounting screws) countersink 82 degree drill press (recommended) Read and understand the entire contents of this manual before attempting assembly or operation of this tool! Inspect contents for shipping damage and shortages. Report problems directly to Bench Dog, Inc. 2004 Bench Dog, Inc. 82-0009-06 0904 RTD10000534AA General Conditions / Limited Two Year Warranty LIMITED TWO-YEAR WARRANTY We make every effort to assure that our products meet quality and durability standards, and warrant to the original retail purchaser that this product is free from defects in materials and workmanship for two years. Remedy shall be limited to Bench Dog’s choice of repair, replacement or refund. This warranty does not provide remedy for consequential economic loss. This is a limited two year warranty. It requires the purchaser to contact Bench Dog in writing within 30 days of discovering the defect. Warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence or accidents, repairs or alterations, or due to lack of maintenance. It excludes components and parts not manufactured by Bench Dog, defects caused by failure to provide a suitable installation environment, and damage caused by use for purposes other than those for which the product was designed. Bench Dog, Inc. reserves the right to make product changes without notice and without obligation to make these changes on products previously sold. It excludes warranties of fitness for a particular purpose. If the product is defective, we reserve the right to fix it, replace it, or refund the cost of the product to you. Typically, this results in a refund. All claims are limited to the two-year claims period. We must receive the product before a credit or refund will be issued. The warranty language on the product or in the product’s manual may contain additional limitations, which govern. If you wish to return something, call the dealer where you purchased the product. If you wish to return something purchased from Bench Dog directly, call 1-800-786-8902 to receive an RMA number. Upon receipt and inspection of the goods, a credit or replacement will be issued for defective products. Return of nondefective items to Bench Dog are subject to a 7% restocking charge. This is necessary due to the cost of checking, repackaging, and inventorying the stock. BENCH DOG DISCLAIMS AND BUYER EXPRESSLY WAIVES ANY AND ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, IMPLIED CONDITIONS OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR ANY OTHER MATTER. Important Safety Points Before operating your router table please read this manual thoroughly. Safety and use tips are contained in the manual. This page is not the sole source of safety information. Retain the manual for future reference. Refer to your router owner's manual for safety instructions regarding use of that tool. This manual is not an instruction book on how to do woodworking with a power tool. We encourage all woodworkers to continually seek improvement in their woodworking skills, regardless of their craftsmanship or years of experience. The router table, fence and accessories must only be used for their intended purpose: woodworking via normal routing operations. “Normal operations” means basic shaping of wood in conditions where grounded electricity, sharp tools, dust, and rapidly spinning parts can be used or encountered safely. The following instructions elaborate on this concept. 1. Do not use your router table as a step or seat. 2. The top and cabinet must be properly secured, and be level before use. Inspect your table and base for damage and levelness prior to each use. 3. Keep work area clean, dry and well lit. 4. The hardware affixing the insert to the routertop must be installed for safe use. Tighten insert hold-down screws before each use. 5. Safe operation requires a router table fence, bit guard, dust collection system, starting pin o...
Эта инструкция также подходит к моделям:Ноутбуки - RT400 (195.55 kb)