Войти:
Оценок - 4, средний балл: 4.3 ( )

Инструкция по эксплуатации Asus, модель Audio Card Xonar D2

Производитель: Asus
Размер: 5.61 mb
Название файла: 2664c987-ee69-414c-9169-c70eb7d7f8a9.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


4 Hardware Setup Step 4 is to click the Hardware Setup to configure the Bit- depth (16/24bit) and latency (1ms~300ms). 5 Sample Rate Step 5 is to select the sample rate from 44.1, 48, 96, 192KHz. When Using Sonar LE… 1 2 3 4 6 5 7 No Item Description 1 Audio Options Step 1 is to open the “Audio Options” window from the Options tab. 2 Driver Mode Step 2 is to select “ASIO” as the driver mode in Advanced tab. (WDM and MME are Windows driver types) The changes will take effect after you restart the program next time. 3 Playback Timing Master After step 2, Sonar LE will display 4 output drivers: “ASUS Xonar D2 ASIO Out -00~06”. Make sure you are using 00 or another one. 4 Recording Timing Master After step 2, Sonar LE will display 1 input driver: “ASUS Xonar D2 ASIO In -00”. Make sure you are using it. 5 Sample Rate Step 5 is to select the default file sample rate (44.1, 48, 96, or 192KHz) for your Sonar project. 6 Bit-depth Step 6 is to select the default file bit-depth (16/24bit) for your project. 7 ASIO Panel If you would like to configure bit-depth (16/24bit) and latency (1ms~300ms) of the Xonar D2 ASIO driver, click this ASIO panel to reset them. The changes will take effect the next time you start the program. For other applications that support ASIO, such as WaveLab, Cubase, Reason, Winamp, etc, the setup will be very similar to the above. 7. Portable Music ProcessorTM Soft-ware Guide 7.1 Introduction Xonar D2 provides the Portable Music ProcessorTM (referred to as PMP hereafter) software tool that contains the following features: • Converts MP3, WMA, AAC (iTunes required), Audio CD, WAVE into WMA or MP3 files with the same ID3 information and post processor effects • Adds Dolby Headphone processing to regular music content for a better listening experience over stereo headphones • Adds Dolby Virtual Speaker (w/ Pro-Logic II) effect to regular music for virtual 5.1 surround over stereo speakers • Normalizes the volume level of your music collection with Smart Volume Normalization (SVN) effect • Provides Analog Loopback Transformation (ALT) technology for high-quality (118dB SNR) accelerated analog recording • Supports MP3 and WMA encoding formats for 128~320Kbps data rates (Windows Media Player 10 or later version and MP3, WMA codecs are required) • Supports transformation speed up to a maximum of 40 times of the normal playback speed (High Speed mode). (The maximum speed is just for your reference because it’s related to your PC’s performance and the sound effects you choose to add. Using ALT recording technology will be limited up to 2X speed on Windows XP. On Vista, the speed will be currently limited to normal 1X all the time.) • As of this writing, iTunes is not available for Windows Vista. As a result, converting iTunes music on Vista is not supported. • If you are going to convert copyright protected music with ALT, you must have valid and legal right to access and play the content. PMP is just a software tool to record the playback analog output signal. Please be careful to abide by the agreement with your content provider. Before you use PMP software, make sure the following items have been completed: 1. Xonar D2 Audio Card has been installed in your PC 2. The Xonar D2 driver has been installed (Xonar D2 audio converter driver is installed for PMP utility) 3. Windows Media Player Ver. 10 or above has been installed on your PC (If it hasn’t, Xonar D2 installer will provide a guide to downloading WMP 10) 4. You will also need an MP3 encoder installed to encode music into MP3 format (If you don’t have this already, the Xonar D2 installer will provide a guide message to download a free MP3 encoder) After PMP is installed, you will find a PMP shortcut icon on the desktop. Double click the icon and PMP will show up as below. 3 1 2 No Item Description 1 Main Setting page Default page to setup and start the music conversion 2 PMP Music page This page will display the converted music files saved in the “PMP Music” folder 3 Software Update This button is used to check online for upgrades to the PMP software and download it for upgrade (make sure your computer is connected to the Internet before you click the button) 7.2 Converting music in “Main Setting” Page Click the main setting page to start the PMP music conversion process. 5 4 1 3 2 No Item Description 1 Select Music Sources Step 1 is to prepare the music sources that you are going to convert. You can select 3 music source folders which can be multiply checked: 1) My Music – This path is locked and refers to C:\Documents and Settings\My Documents\My Music. 2) iTunes Music – The path is locked and refers to C:\Documents and Settings\My Documents\iTunes Music. 3) Others – The default path refers to C:\Documents and Settings\My Documents\My Music but can be designated to other folder by clicking . In the right side of the window, you will see all of the music files from the selected folders that can be converted by PMP. You can select all or click each...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории