Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Ноутбуки - M-68 (5.4 mb)
Ноутбуки - M-68 (5.14 mb)
Ноутбуки - M-68 (5.36 mb)
Фрагмент инструкции
Replacing the Multimedia Keyboard Cover
1
Replacing the Multimedia
8 Turn your notebook over so the top is facing up.
9 Open the LCD panel to the fully opened position.
Keyboard Cover
10 Insert the small flat-blade screwdriver under each of the hinge
covers and gently pry them up.
Tools
You need a small Phillips and a small flat-blade screwdriver to replace
the multimedia keyboard cover.
Preventing static electricity discharge
The components inside your notebook are extremely sensitive to static
electricity, also known as electrostatic discharge (ESD). ESD can
permanently damage electrostatic discharge-sensitive components in
11 Pull the cover off your notebook by lifting the back corners of
your notebook.
the cover. Be careful to not damage the LCD panel.
Warning
To avoid exposure to dangerous electrical voltages and moving parts,
turn off your notebook and unplug the AC adapter, modem cable, and
network cable and remove the battery before replacing a component.
Before working with notebook components, follow these guidelines:
•
Avoid static-causing surfaces such as carpeted floors, plastic,
and packing foam.
12 Slide the black multimedia keyboard cover connector clip to the
•
Remove components from their antistatic bags only when
back of your notebook, then slide the cable out of the clip. Be
you are ready to use them. Do not lay components on the
careful not to touch or damage any other components.
outside of antistatic bags because only the inside of the bags
provide electrostatic protection.
•
Always hold components by their edges. Avoid touching the
edge connectors. Never slide components over any surface.
•
Wear a grounding wrist strap (available at most electronics
stores) and attach it to a bare metal part of your workbench
or other grounded connection.
•
Touch a bare metal surface on your workbench or other
grounded object.
Clip
To replace the multimedia keyboard cover:
1 Follow the guidelines under “Preventing static electricity
discharge.”
2 Turn off your notebook.
13 Slide the white power button cable connector clip to the left of
3 Close the LCD panel.
your notebook, then slide the cable out of the clip. Be careful not
4 Disconnect the AC adapter, modem cable, and network cable.
to touch or damage any other components.
5 Disconnect all peripheral devices connected to your notebook and
remove any Express and memory cards.
6 Turn your notebook over so the bottom is facing up, then remove
the battery. For more information, see “Changing Batteries” in
your Reference Guide.
7 With a small Phillips screwdriver, remove the two keyboard cover
screws from the inside of the battery compartment and put them
in a safe place.
Screw
Screw
Clip
14 Remove the old multimedia keyboard cover.
15 Make sure the white power button cable cover connector clip is
fully moved toward the left of your notebook, insert the new
multimedia keyboard power button cable into the connector,
then slide the white clip to lock the connector in place.
Important
The cable is correctly oriented if the blue side is down and the silver
contacts are up.
Technical Support
© 2007 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks
See the label on the bottom of the notebook for Customer Care Information. See
or registered trademarks of Gateway, Inc. in the United States and other countries.
your Reference Guide for important safety, regulatory, and legal information.
All other brands and product names are trademarks or registered trademarks of
their respective companies.
...Эта инструкция также подходит к моделям:
Ноутбуки - P-170 (3.43 mb)
Ноутбуки - P-171 (3.43 mb)
Ноутбуки - P-172 (3.43 mb)
Ноутбуки - P-173 (3.43 mb)