Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Ноутбуки - X75-A7195 (6.82 mb)
Ноутбуки - X75-A7195 (173.86 kb)
Фрагмент инструкции
To enable this function, select Enable. To disable this function, toggle the Enable button to the Disabled position. You can also control whether charging takes place when the computer is running on battery power. To do so, select or deselect the Enable under Battery Mode check box in the utility. If you enable charging when the computer is running on battery power, you can specify that charging stops when battery power drops below a certain level. Use the slider at the bottom of the utility window (beneath the “Disable features when the battery level reaches 10%” heading) to specify when charging should stop. For example, if you set the slider to 10%, charging will stop when 10% or less of the battery power remains. Power supply mode settings Your computer may provide two different charging modes, to support various types of USB devices. If your computer provides more than one charging mode, the charging mode you should select depends on the USB device you want to charge. For example, Auto Mode, which is the default mode, will charge a wide variety of digital audio players. If your device does not charge in Auto Mode, try using Alternate Mode. To select a different charging mode, use the Power supply mode drop-down list in the utility. (Sample Image) Sleep and Charge screen Utilities Utilities Sleep Utilities NOTE With certain external devices, the USB Sleep and Charge function may not work no matter which charging mode you select. In those cases, disable USB Sleep and Charge in the utility and turn the computer on to charge the device, or use a different charging device. Sleep and Music Your Toshiba computer may be equipped with the “Sleep and Music” feature that allows you to listen to music stored on a portable audio device using the speakers of your computer, even when the computer is powered OFF. Power OFF includes Sleep Mode, Hibernation Mode, or shutdown state. When the Sleep and Music feature is enabled, it is possible to play music from the computer’s speakers by connecting an audio cable to the Microphone/Line-in jack. Using this feature discharges the computer’s battery; therefore, it is recommended that the computer be connected to an external power source via the AC Adaptor. The volume settings and sound quality may differ between Windows® mode and “Sleep and Music” mode. When using the “Sleep and Music” feature, the volume adjustment and mute setting cannot be changed from the computer. To adjust these settings, use the volume controls on your portable audio device. Be sure to turn down the volume of the portable audio device before connecting it to the computer. NOTE This feature applies only to the computer’s speakers. The headphone jack and mute function on the computer are disabled when using “Sleep and Music.” Utilities Utilities HDD Protection Utility HDD Protection Utility The HDD Protection Utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detector’s sensitivity level for AC power and battery power operation. To use the HDD Protection Utility: 1 To access Sleep Utilities from the Start screen begin typing System Settings. 2 Click System Settings. 3 Click HDD Protection. The HDD Protection Properties window appears. (Sample Image) HDD ProtectionProperties window 4 Select ON to enable HDD protection, or select OFF to disable HDD protection. 5 Set the battery and AC power detection levels as desired. 6 Click OK. Utilities Utilities Function Key Function Key TOSHIBA Function Key enables you to activate functions by pressing specific keys either singly or in combination with Fn. Some functions show the toast notification at the edge of the screen. These settings turn notifications ON/OFF. 1 To access Function Key from the Start screen begin typing Function Key. 2 Click or touch Function Key. The Function Key screen appears. (Sample Image) Function Key 3 Slide the ON/OFF switch to enable/disable each notification. 4 Click or touch Close. NOTE The Function option is disabled by default. Utilities Utilities Recovery Media Creator Recovery Media Creator The Recovery Media Creator utility enables you to create recovery media that can be used to return your system to its out-of-box state, if necessary. For detailed information on using the utility to create recovery media, see “Creating recovery media” on page 58. Service Station The Service Station helps you keep your new computer running at its best by notifying you when updated software, firmware, documentation or other information is available for your computer. The Service Station will alert you when updates are available, and you can then choose to install the updates if you wish. Utilities Utilities TOSHIBA ApplicationInstaller TOSHIBA Application Installer The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were ...
Эта инструкция также подходит к моделям:Ноутбуки - X70-AST3G23 (6.99 mb)
Ноутбуки - X70-AST3G24 (6.99 mb)
Ноутбуки - X70-AST3G25 (6.99 mb)
Ноутбуки - X70-AST3G26 (6.99 mb)