Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. • Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit. • Make sure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package. • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. • To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry. • Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet. • Place the product on a stable surface. • If you encounter technical problems with the product, contact a qualified service technician or your retailer. Caution! The symbol of the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products. Part No. 2006025600 Edition 1 Printed in China June 2008 AIMB-256 User Manual ii Technical Support If a problem arises with your system and no solution can be obtained from the user.s manual, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance. Visit the Advantech website for FAQ, technical guide, BIOS updates, driver updates, and other information: Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: • 1 x Intel GME965 Mini ITX Main board • 1 x CD-ROM contains the followings: . User.s manual (this manual in PDF file) . Driver CD • 2 x COM cables (9-pin w/o bracket, 26 cm) • 1 x IDE HDD cable (40-pin, 30 cm) • 2 x SATA data cables • 2 x SATA power cables • 1 x I/O Shield • 1 x Startup Manual If any of the above items is damaged or missing, please contact your retailer. iii AIMB-256 User Manual AIMB-256 User Manual Contents Chapter 1 Production Introduction......................1 1.1 Before you Proceed .................................................................................. 2 1.2 Motherboard Overview..............................................................................2 1.2.1 Placement Direction......................................................................2 1.2.2 Screw Holes..................................................................................3 1.3 Motherboard Layout .................................................................................. 4 Figure 1.1 Motherboard Layout ................................................... 4 1.3.1 Layout Content List.......................................................................5 Table 1.1: Slots............................................................................ 5 Table 1.2: Jumpers......................................................................5 Table 1.3: Rear Panel Connector................................................5 Table 1.4: Internal Connector ...................................................... 5 1.4 Central Processing Unit (CPU) ................................................................. 6 1.4.1 Installing the CPU ......................................................................... 7 1.4.2 Installing the CPU Heatsink and Fan............................................9 1.4.3 Uninstalling the CPU Heatsink and Fan...................................... 12 1.5 System Memory ...................................................................................... 13 1.5.1 DIMM Sockets Location..............................................................13 1.5.2 Memory Configurations...............................................................14 1.5.3 Installing a DDR2 DIMM ............................................................. 14 1.5.4 Removing a DDR2 DIMM ........................................................... 16 1.6 Expansion Slots ...................................................................................... 16 1.6.1 Installing an Expansion Card ...................................................... 16 1.6.2 Configuring an Expansion Card.................................................