Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Once the button is slid to unlock position, the battery is removable. 4. Ventilator The ventilator is designed to cool the system. DO NOT block the ventilator 2-13 Introductions .. Specification The specification may change without notice. The actual products sold are different from areas. Please check the detailed specification with your local dealers. Physical Characteristic Dimension 382.9 (W) x 249.2 (D) x 39.5 (H) mm Weight 2.4 kg (with 6-cell battery) CPU Socket Processor Type Supported Processor 946 pins, rPGA Intel® Shark Bay Haswell Intel® Quad/ Dual-Core processor L3 Cache Up to 8MB (Based on CPU) Core Chip PCH Intel® Lynx Point (HM8 Series) Memory Technology DDR3L 1600 MHz Memory DDR3L SO-DIMM X 2 slots 4G/8G DDR3L SDRAM Maximum Up to 16 GB Power AC/DC Adapter (1) (optional) 65W, 19V Input: 100~240V, 1.5A~2.0A, 50~60Hz Output: 19V 3.42A AC/DC Adapter (2) (optional) 90W, 19V Input: 100~240V, 1.5A~2.0A, 50~60Hz Output: 19V 4.74A AC/DC Adapter (3) (optional) 120W, 19.5V Input: 100~240V, 1.5A~2.0A, 50~60Hz Output: 19.5V 6.15A Battery Type 6-cell / 9-cell (optional) RTC Battery Yes 2-14 Storage (items listed here may very without notice) HDD form factor 2.5” HDD / SSHD (optional) Optical Drive Device Super Multi / Blu-ray (optional) I/O Port Monitor (VGA) D-Sub x 1 x 2 (USB 3.0) x 1 (USB 2.0) Mic-in / Line-in x 1 Headphone-out x 1 RJ45 x 1 HDMI x 1 Card Reader x 1 (SD) The supported memory cards may vary without notice. Communication Port LAN 10/100/1000 Ethernet Wireless LAN Optionally supported Bluetooth Optionally supported Display LCD Type 15.6" LED panel Brightness Controlled by K/B hot-keys Video Graphics Discrete / UMA (optional) With NVIDIA Optimus technology supported. CRT output Supported HDMI output Supported Audio Sound Controller Realtek® ALC269 Internal Speaker x 2 2-15 Introductions Sound Volume Adjust by K/B hot-key & SW Software & BIOS USB Flash Boot USB floppy boot up DOS only BIOS Fast Boot Support Others Compatibility WHQL Kensington Lock Hole x 1 2-16 3 Getting Started Getting Started .. Begin to Use the Notebook For a new user of this notebook, we would like to suggest you follow the illustrations below to begin to use the notebook. 3-2 .. Power Management AC Power It is strongly recommended to connect the AC/DC adapter to the notebook and use the AC power while using this notebook for the first time. When the AC power is connected, recharging the battery will start immediately. Note that the AC/DC adapter included in the package is approved for your notebook; using other adapter model may damage either the notebook or other devices attached to it. Do not cover the AC/DC adapter since it may generate a certain heat while in use. Always be aware of heat coming from the AC/DC adapter in use. Battery Power This notebook is equipped with a high-capacity Li-ion battery pack. The rechargeable Li-ion battery pack is an internal power source of the notebook. Be aware of that this battery pack may be damaged if users try to disassemble the battery pack on their own. Also, please note that the limited warranty of the battery pack will be voided if the battery pack is disassembled by non-authorized technicians To prevent explosion caused by improper battery replacement, use the same or equivalent type of battery recommended by the manufacturer only. Always keep the battery which is not in use in a safe place. Please follow your local laws and regulations to recycle the unused battery pack. It is always recommended to have another battery pack in reserve for enough power supply. Please contact your local dealer to purchase a battery pack that is compliant to your notebook. 3-3 Getting Started 3-4 Installing the Battery Pack 1. To install the battery, first, locate the steady gutter of the battery pack, and the battery bolt on the battery tray as shown below. 2. Align the steady gutter and battery bolt with correct orientation and make sure they are joined properly. 3. Overturn the battery pack with the direction shown below. 4. Press down the battery pack to fasten the battery pack in the battery tray. 5. Press the lock/unlock button to the Lock position to make sure the battery pack is securely fastened. 3-5 Releasing the Battery Pack 1. Before releasing the battery, make sure the notebook is turned off, and the AC power is disconnected. 2. Press the lock/unlock button to the unlocked position. 3. Locate the battery release button on the bottom side. 4. Push and hold the release button to the battery releasing direction as shown on the bottom side. 5. Dig the edge of battery pack out of the battery tray with your finger tip. Be careful with your finger while trying to take out the battery pack. 6. Stand the battery pack upright first, and then pull the battery pack out. Do not use force here. Getting Started Battery Safety Tips Replacing or handling the battery incorrectly may present a risk of fire or explosion, which could cause serious injury. • Only replace the main battery pack with th...