Оценок - 5, средний балл: 4.2
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
For detailed instructions on how to attach and charge an extended battery pack, see the manual that came with your extended battery pack. To install the battery pack 1 Turn off the computer, close the LCD screen lid, and unplug the AC adapter if plugged. 2 Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover. ! Be careful not to lose the removed screws. Be careful not to touch the wires and the projections inside the bottom cover. Getting Started > Using the Battery Pack n 23 N Slide the battery pack into the battery compartment in the direction of the arrow. Push the battery pack down into the compartment until the projection (3) clicks into place. Getting Started > Using the Battery Pack n 24 N Replace the cover. Make sure all the tabs on the cover are slid in place and push the cover in the direction of the arrow. 6 Replace and tighten the removed screws. To remove the battery pack ! You will lose all unsaved data if you remove the battery pack while your computer is on and not connected to the AC adapter. 1 Turn off the computer, close the LCD screen lid, and unplug the AC adapter if plugged. 2 Unscrew the two screws (1), slide the bottom cover in the direction of the arrow (2), and remove the cover. ! Be careful not to lose the removed screws. Getting Started > Using the Battery Pack n 25 N 3 Pull and hold the tab in the direction of the arrow (3) and pull the battery pack in the direction of the arrow (4). Slide the battery pack away from the computer in the direction of the arrow. Getting Started > Using the Battery Pack n 26 N . If your computer does not recognize the battery pack, turn off your computer and push and hold the battery off button for three seconds with a thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again. If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If this does not solve the problem, push and hold the battery off button for three seconds. If the problem persists, remove both battery packs and install them once again. ! For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function with a genuine Sony battery pack. Getting Started > Using the Battery Pack n 27 N Charging the Battery Pack The battery pack supplied with your computer is not fully charged at the time of delivery. To charge the battery pack 1 Install the battery pack. 2 Connect the computer to a power source with the AC adapter. The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum charge level you selected, the charge indicator turns off. Charge indicator status Meaning Lit in orange The battery pack is charging. Blinks along with the green power indicator The battery pack is running out of power. (Normal mode) Blinks along with the orange power indicator The battery pack is running out of power. (Sleep mode) Blinks fast in orange A battery error has occurred due to a failed battery pack or an unlocked battery pack. ! Charge the battery pack as described in this manual from your first battery charge. Getting Started > Using the Battery Pack n 28 N . Keep the battery pack in your computer while it is directly connected to an AC power source. The battery pack continues to charge while you are using the computer. When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack. Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect the life of battery. While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate. If the battery pack runs out of power while the computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently. About the use of an extended battery pack . If an extended battery pack is attached to your computer, the primary battery pack is charged first up to about 80% of its battery capacity. Then, the extended battery pack starts charging up to about 80%. After both battery packs are charged up to about 80%, the primary battery pack starts charging to 100%. Then, the extended battery pack starts charging to 100%. . If an extended bat...
Эта инструкция также подходит к моделям:Ноутбуки - VPCSB1A9E_B (3.06 mb)
Ноутбуки - VPCSB1A9R_B (3.06 mb)
Ноутбуки - VPCSB1B7E (3.06 mb)
Ноутбуки - VPCSB1B9E_B (3.06 mb)