Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации Sony, модель VPCSE2N1E_S

Производитель: Sony
Размер: 3.09 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


. If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point. Why does the network connection stop when I change the encryption key? Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed. You can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches. Troubleshooting > Wireless WAN n179 N Wireless WAN What should I do if my computer cannot connect to the wireless WAN? . Make sure the battery pack is installed properly and charged. . Make sure the SIM card is 3G data enabled and activated by your telecom operator. When inserting the SIM card, be sure to follow the procedure in Inserting a SIM Card (page 73). . Your mobile phone network needs to cover your area. Contact your network provider for information on the network coverage. . Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. . Make sure the switch next to Wireless WAN is set to On in the VAIO Smart Network window. . Make sure that the Access Point Name (APN) is properly configured in your connection manager software. If not, contact your telecom operator to get the correct APN to use. See the help file included with the connection manager software for more information about the APN configuration. . Check that your connection manager software has detected the wireless WAN modem successfully. It may take some time for the software to detect the wireless WAN modem. . For further information on the wireless WAN function, visit the VAIO support web site. . Make sure the SIM card cover is closed. . If you have disabled the wireless devices in the BIOS setup screen, you cannot access the Internet through a wireless network. To enable the devices, follow the steps in Disabling Built-in Devices (page 133). Troubleshooting > BLUETOOTH Technology n180 N BLUETOOTH Technology What should I do if other BLUETOOTH devices cannot find my computer? . Make sure both devices have the BLUETOOTH function enabled. . Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. . You cannot use the BLUETOOTH function while your computer is in a power saving mode. Bring the computer back to Normal mode, then turn on the WIRELESS switch. . Your computer and the device may be too far apart. Wireless BLUETOOTH technology works best when the devices are within 10 meters of each other. . If you have disabled the wireless devices in the BIOS setup screen, you cannot use the BLUETOOTH function. To enable the devices, follow the steps in Disabling Built-in Devices (page 133). What should I do if I cannot find the BLUETOOTH device I want to communicate with? . Check that the BLUETOOTH function of the device you want to communicate with is on. See the other device's manual for more information. . If the device you want to communicate with is already communicating with another BLUETOOTH device, it may not be found or it may not be able to communicate with your computer. . To allow other BLUETOOTH devices to communicate with your computer, follow these steps: 1 Click Start and Devices and Printers. 2 Right-click the BLUETOOTH device icon and click Bluetooth settings. 3 Click the Options tab and select the Allow Bluetooth devices to find this computer check box. Troubleshooting > BLUETOOTH Technology n181 N What should I do if other BLUETOOTH devices cannot connect to my computer? . Check the suggestions in What should I do if I cannot find the BLUETOOTH device I want to communicate with? (page 180). . Make sure the other devices are authenticated. . The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on radio wave quality, and on the operating system or the software in use. Move your computer and BLUETOOTH devices closer to each other. . If you have disabled the wireless devices in the BIOS setup screen, you cannot use the BLUETOOTH function. To enable the devices, follow the steps in Disabling Built-in Devices (page 133). Why is my BLUETOOTH connection slow? . The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave quality, and on the operating system or ...

Эта инструкция также подходит к моделям:
Ноутбуки - VPCSA4A4E (3.09 mb)
Ноутбуки - VPCSA4B4E (3.09 mb)
Ноутбуки - VPCSA4C5E (3.09 mb)
Ноутбуки - VPCSA4S9R_XI (3.09 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории