Оценок - , средний балл:
(
)
)
Производитель: Sony
Размер: 1.25 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
К этому устройству также есть другие инструкции:
Ноутбуки - VGN-FZ31J (1.46 mb)
Ноутбуки - VGN-FZ31J (1.44 mb)
Ноутбуки - VGN-FZ31J (1.46 mb)
Ноутбуки - VGN-FZ31J (506.02 kb)
Фрагмент инструкции
What should I do if I cannot enter certain characters with the keyboard? If you cannot enter U, I, O, P, J, K, L, M, and so on, the Num Lk key may be activated. Check that the Num lock indicator is off. If the Num lock indicator is on, press the Num Lk key to turn it off before entering these characters. 165nNTroubleshooting Floppy Disks Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is connected? Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps: 1 Close all programs that are accessing the floppy disk drive. 2 Wait for the LED indicator on the floppy disk drive to turn off. 3 Push the eject button to remove the disk, and disconnect the USB floppy disk drive from your computer. 4 Reconnect the floppy disk drive by inserting the USB connector into the USB port. 5 Restart the computer by clicking Start, the arrow next to the Lock button, and Restart. What should I do if I cannot write data to a floppy disk? . Make sure the floppy disk is properly inserted in the drive. . If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can either use a floppy disk that is not write-protected or disable the write-protect feature. 166nNTroubleshooting Audio/Video What should I do if I cannot use my DV camcorder? If it is prompted that the i.LINK device seems to be disconnected or turned off, the i.LINK cable may not be securely plugged into the port on your computer or camcorder. Unplug the cable, and plug it in once again. See Connecting an i.LINK Device (page 89) for more information. . i.LINK is a trademark of Sony Corporation used only to designate that a product contains an IEEE 1394 connection. The procedure to establish an i.LINK connection may vary, depending on a software application, an operating system, and a compatible i.LINK device. Not all products with an i.LINK connection can communicate with each other. See the manual that came with your compatible i.LINK device for more information on operating conditions and proper connection. Before connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm their operating system compatibility and required operating conditions. How do I turn off the Windows startup sound? To turn off the Windows startup sound, follow these steps: 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Manage audio devices under Sound. 4 On the Sounds tab, click to cancel the Play Windows Startup sound check box. 5 Click OK. 167nNTroubleshooting What should I do if I do not hear the sound from the sound output device connected to the HDMI port? ! This Q & A entry applies to models with the NVIDIA video controller only. . Once you have connected a device to the HDMI port, you need to change the device for sound output if you want to hear sound from the device. To change the sound output device, follow these steps: 1 Close all open programs. 2 Click Start and Control Panel. 3 Click Hardware and Sound. 4 Click Manage audio devices under Sound. 5 On the Playback tab, select the desired device for sound output and click Set Default. . If you still hear no sound from the sound output device, follow these steps: 1 Follow steps 1 to 4 above. 2 On the Playback tab, select the HDMI icon and click Properties. 3 Click the Advanced tab. 4 Select the sample rate and bit depth (for example, 48000 Hz, 16 bit) which the device supports. 5 Click OK. 168nNTroubleshooting How do I output the Dolby Digital or DTS sound through an HDMI-compatible device? ! This Q & A entry applies to models with the NVIDIA video controller only. To output the Dolby Digital or DTS sound from a disc through an HDMI-compatible device connected to your computer, follow these steps: 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Manage audio devices under Sound. 4 On the Playback tab, select the HDMI icon and click Properties. 5 Click the Supported Formats tab. 6 Click to select the DTS audio and Dolby Digital check boxes. 7 Click OK. ! If the Dolby Digital or DTS sound is output to a device that does not support it, the device will not play any sound. In such a case, cancel the DTS audio and Dolby Digital check boxes. 169nNTroubleshooting Memory Stick Media What should I do if I cannot use Memory Stick media, which were formatted on a VAIO computer, on other devices? You may need to reformat your Memory Stick media. Formatting Memory Stick media erases all data, including music data previously saved on it. Before you reformat Memory Stick media, back up important data and confirm that the media does not contain files you want to keep. 1 Copy the data from the Memory Stick media onto your hard disk drive to save data or images...
Эта инструкция также подходит к моделям:Ноутбуки - VGN-FZ31E (1.25 mb)
Ноутбуки - VGN-FZ31ER (1.25 mb)
Ноутбуки - VGN-FZ31L (1.25 mb)
Ноутбуки - VGN-FZ31M (1.25 mb)