Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Turns on when the computer reads or writes data. Turns on steadily or blinks to indicate battery charge status. Turns on when wireless networking is enabled. Turns on when a card with Bluetooth® wireless technology is enabled. To turn off only the Bluetooth wireless technology function, right-click the icon in the system tray and select Disable Bluetooth Radio. Turns on when the numeric keypad is enabled. Turns on when the Caps Lock function is enabled. Turns on when the Scroll Lock function is enabled. Appearance Description Next Step ON-FLASH-FLASH No SODIMMs are installed 1. Install supported memory modules. 2. If memory is already present, reseat the module(s) one at time in each slot. 3. Try known good memory from another computer or replace the memory. 4. Replace the system board. FLASH-ON-ON System board error 1. Reseat the processor. 2. Replace the system board. 3. Replace the processor. Back to Contents Page FLASH-ON-FLASH LCD panel error 1. Reseat the LCD cable. 2. Replace the LCD panel. 3. Replace the video card/system board. OFF-FLASH-OFF Memory compatibility error 1. Install compatible memory modules. 2. If two modules are installed remove one and test. Try the other module in the same slot and test. Test the other slot with both modules. 3. Replace the memory. 4. Replace the system board. ON-FLASH-ON Memory is detected but has errors 1. Reseat the memory. 2. If two modules are installed remove one and test. Try the other module in the same slot and test. Test the other slot with both modules. 3. Replace the memory. 4. Replace the system board. OFF-FLASH-FLASH Modem error 1. Reseat the modem. 2. Replace the modem. 3. Replace the system board. FLASH-FLASH-FLASH System board error 1. Replace the system board. FLASH-FLASH-OFF Option ROM error 1. Reseat the device. 2. Replace the device. 3. Replace the system board. OFF-ON-OFF Storage device error 1. Reseat the hard drive and optical drive. 2. Test the computer with just the hard drive and just the optical drive. 3. Replace the device that is causing the failure. 4. Replace the system board. FLASH-FLASH-ON Video card error 1. Replace the system board. Back to Contents Page Adding and Replacing Parts Dell™ Vostro™ 1014/1015 Service Manual Back to Contents Page ExpressCard Battery Access Panel Memory Control Panel Cover Display Assembly Processor Fan I/O Board System Board Heat Sink Memory Card Optical Drive Hard Drive WLAN Card Keyboard Palm Rest Coin-Cell Battery Internal Card with Bluetooth® Wireless Technology Speaker Processor Back to Contents Page Specifications Dell™ Vostro™ 1014/1015 Service Manual System Information Memory Audio Battery 5-in-1 Memory Card Reader Display Camera (Optional) Physical Processor Communications Keyboard Ports and Connectors Video Touch Pad AC Adapter Environmental NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start (or Start in Windows® XP)® Help and Support, and then select the option to view information about your computer. System Information System chipset Intel® GM45 Data bus width 64 bits DRAM bus width dual-channel (2) 64 bit buses Processor address bus width 36 bits Flash EPROM 1 MB Processor Processor type Intel Core 2 Duo, or Intel Celeron® processors (Socket P) L2 cache 3 MB or 6 MB External bus frequency 667 and 800 MHz Memory Memory module connectors two DIMM sockets Memory module capacities 1 (one DIMM), 2 (one DIMM or two DIMMs), or 4 GB (two DIMMs) capable Memory type DDR2/DDR3 800 MHz (Non-ECC only) Minimum memory 1 GB Maximum memory 4 GB Communications Modem Integrated Conexant CX20548-11Z 56kbps modem Network adapter 10/100/1000 ethernet LAN on system board Network controller Realtek RTL8111DL Wireless internal support for PCI-e Mini-Card, WLAN: Dell WLAN 5100 or Broadcom WLAN1397_1510 Bluetooth® 355 V2.0 and Bluetooth 360 V2.1 wireless technology (optional) Camera optional 1.3MP and associated camera software Audio Audio type two-channel high-definition audio codec (HDA) Audio controller Conexant CX-20583-10z Stereo conversion 24-Bit (stereo digital-to-analog) 24-Bit (stereo analog-to-digital) Interfaces: Internal high definition audio External microphone-in connector, stereo headphones/speakers mini-connector Speakers one 2-watt, 4-ohm speaker Internal speaker amplifier 2-W channel into 4 ohms Internal microphone single digital microphone Volume controls program menus, keyboard function keys Keyboard Number of keys 105 (U.S. and Canada); 106 (Europe); 109 (Japan) Layout QWERTY/AZERTY/Kanji Size: Standard full-sized (19 mm key pitch) Maximum 359.4 mm x 118.9 mm x 5.2 mm (14.15 x 4.681 x 0.205 inches) Battery Type 4 or 6-cell "smart" lithium ion Dimensions: Depth 53.39 mm (2.10 inches) Height 20.44 mm (0.80 inches) Width 206.44 mm (8.12 inches) Voltage: 4-cell 14.8 VDC 6-cell 11.1 VDC Temperature range: Operating 0° to 35°C (32° to 95°F) Storage –20° to 65°C (–4° to 149°F) Coin-cell battery CR-2032, 4–year life Ports and Connectors Exp...