Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
© 1999–2000 Dell Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, DualPoint, ExpressCharge, and Inspiron are trademarks of Dell Computer Corporation; Microsoft, Windows, MS-DOS, and Windows NT are registered trademarks of Microsoft Corporation; Intel and Pentium are registered trademarks, and Celeron and SpeedStep are trademarks of Intel Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own. Initial release: 20 Sep 1999 Last revised: 22 Feb 2000 Conventions Technical Overview Using the Computer Utilities and Drivers for Microsoft Windows 98 Utilities and Drivers for Microsoft Windows NT Utilities and Drivers for Microsoft Windows 2000 Technical Specifications System Setup Program System Error Messages Passwords and Security Ports and Connectors Power Sources Power Conservation Removing and Replacing Parts Back to Contents Page Using the Computer: Dell™ Inspiron™ 3800 System Reference Storage Devices Using the Media Bay Your computer comes with a diskette drive installed in the media bay. You can also install a battery, a CD drive, a DVD-ROM drive, a SuperDisk LS-120 drive module, a second hard-disk drive, or a Zip drive in the media bay. To make the computer as light as possible, use the travel module in the media bay in place the available drives. of any of If your computer is running Microsoft® Windows NT® with Softex Docking Services or Microsoft Windows® 98 with Softex BayManager, see "Installing Devices in the Media Bay With Softex Docking Services or Softex BayManager Software." If your system does not have Softex Docking Services or Softex BayManager, see "Installing Devices in the Media Bay Without Softex Docking Services or Softex BayManager Software." Installing Devices in the Media Bay With Softex Docking Services or BayManager Software Softex Docking Services for Windows NT and Softex BayManager for Windows 98 allow you to swap a device to and from the media bay while the computer is on. You do not have to shut down or restart the computer for the device to be recognized. You may swap diskette drives, hard-disk drives, SuperDisk LS-120 drives, CD-ROM drives, DVD-ROM drives, and Zip drives. To install a device in the media bay, perform the following steps: 1. Verify that the Diskette Reconfig option in the System Setup program is set to Any Time. 2. Save your work and close all open files and application programs. 3. If the computer is docked, undock it. 4. Double-click the Docking Services or BayManager icon in the Windows system tray on the taskbar. The Softex BayManager window appears for Windows 98, and the Docking Services window appears for Windows NT. 5. Click Remove/Swap. 6. If the media bay contains a device, remove the device as follows: a. Verify that the Display Close option in the System Setup program is set to Active. b. Close the computer display and turn the computer over. c. Slide the media bay latch toward the Unlock icon. d. Hold the media bay latch with one hand while pulling the device out of the bay your other hand. e. Release the media bay latch after you remove the device. f. Turn the computer over and open the computer display. Storage Devices Touch Pad and Track Stick CD-ROM, CD-RW, and DVD-ROM Drives PC Cards Audio Devices Display Embedded Numeric Keypad Extended Desktop Mode Key Combinations NOTICE: When the CD-ROM, DVD-ROM, LS-120, and diskette drives are not inside the computer, they are fragile and must be handled carefully to avoid damage. Do not press down on the drives or place heavy objects on top of them. Place the drives in a travel case to keep them free of dust and liquids. Store the drives in a safe place. NOTICE: When the CD-ROM, DVD-ROM, SuperDisk LS-120, diskette drives, and Zip drives are not inside the computer, they are fragile and must be handled carefully to avoid damage. Do not press down on the drives or place heavy objects on top of them. Place the drives in a travel case to keep them free of dust and liquids. Store the drives in a safe place. g. If you want the computer to activate save-to-disk suspend mode when you close the display while the computer is turned on, set the Display Close option in the System Setup program to Suspend. 7. Slide the new device firmly into the media bay. You should hear a click when the device is fully seated. 8. Click OK. Then click OK again to close the Softex BayManager window. Installing Devices in the Media Bay Without Softex Docking Services or Softex BayManager To install a device in the media bay, perform the following steps: 1. Verify th...