Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Ноутбуки - T1028C (898.68 kb)
Ноутбуки - T1028C (1.91 mb)
Ноутбуки - T1028C (1.92 mb)
Фрагмент инструкции
Please refer to this chapter and follow the instructions to solve troubles. 5.1 TroubleshootingCheck temperature of battery pack’s surface. Battery pack can’t be recharged if its temperature is too high or too low. Recharged it after ••••••••••••••••••••••• its temperature is the same with the normal environment one. Can’t be recharged after connecting If battery pack is fully discharged, it won’t be AC Adapter recharged at once. Please wait for some min utes. English 30 Warning: Under the condition that you can’ t handletrouble, please refer to your dealer to get professional service. AC Adapter Trouble Solution If the power indicators of battery pack are always not lit up, its life may be over. Please Make sure the AC adapter is well connected to contact your dealer to buy another one. No power supplies to T1028 TouchNote Battery pack the power source and T1028 TouchNote. Check the cable and plug to make sure they are OK. If they are broken, please contact your local dealer ASAP. Battery life is not as long as it should be Trouble Solution No power supplies The remaining power in battery pack may be to T1028 Touch-not enough to power on the machine. Connect Note AC Adapter to recharge it. Battery life depends on using condition of T1028 TouchNote. You can change the settings in Power Manager of OS to save power. Battery pack can’t exert its full capacity if it works when not fully recharged frequently. Power T1028 TouchNote by battery pack until its power drops to a critically low level and the machine emits a high-pitched beep or displays a warning message; after that, recharge bat tery pack to make battery pack work longer. T1028 TouchNote USER’S MANUAL WARNING: Please pay attention to the following WARNING: Please pay attention to the following information about information regarding the battery pack: keyboard maintenance. 1.Be sure to recycle the waste batteries. 1.Dust build-up may occur to the keyboard after long-term use. 2.Do not place the batteries near high-temperature It is recommended to clean the keyboard with a small brush. locations, fire source or in burning fire as this may Please shut down the machine before cleaning the surface of cause the batteries to explode the keyboard and wipe it with a soft cloth dipped in cleaner or 3.Do not assemble/disassemble /modify the batteries water gently. without authorization. 2.In case any liquid enters the keyboard, shut off the power 4.Use the battery pack provided by the original supply immediately, remove the batteries and contact the English manufacturer only. Batteries other than those supplied original manufacturer directly for repair. Do not disassemble the by the original manufacturer may damage the device. keyboard yourself for repair. Keyboard Trouble Solution Hard disc drive (HDD) Trouble Solution Press character The operating system is corrupted by incorrect keys but number operation or virus. Try to clean virus and then Check if Num Lock is activated. displayed instead HDD can’t be configure your operating system correctly. of character booted Maybe the documents of your OS run in error; Make sure there is no software to configure the please refer to the manual of your OS. Confusing display keyboard. There is too much file fragment. Use disk HDD performs very defrag tools to rearrange the programs on the slowly hard disk. WARNING: Please pay attention to the following information about Hard Drive maintenance. 1.The hard disk is a high-speed data storage device. Avoid using the TouchNote in unstable locations as far as possible to prevent hard disk damage and data loss. 2.Please use the computer in accordance with normal startup/ shutdown procedures; improper startup/shutdown may shorten the service life of the hard disk. 4.The touch control LCD screen is the most fragile component of the TouchNote and is prone to rupture under external forces. Do not place any object on the keyboard or between the keyboard and the screen to prevent damage to the LCD screen. 5.When traveling with Gigabyte T1028 TouchNote, place it in a special case in a tidy manner as far as possible. Excess objects may squeeze the machine and therefore damage the LCD screen. English 6.Do not touch the screen with sharp objects or fingers LCD directly. 7.It is recommended that the LCD screen be wiped with a special screen cleaning cloth. Wipe the screen gently to Trouble Solution Press hot key Fn + F5 to change the display mode if certain external monitor is connected. avoid breakage of the screen. The screen is blank Make sure the system isn’t in the mode of 8.Prevent any liquid from entering the LCD screen as this may damage the elements of the LCD screen. Hibernation or Standby. Printer Trouble Solution Make sure printer is powered on. The data can’t be Make sure its cable is OK and its USB interface WARNING: Please pay attention for below matters at mounting design of touch panel of LCD module. 1.Do not put a heavy force along the edge of active area output from T1028...