Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
TECHNICAL NOTE: To avoid losing any data, save your files and then either completely shut down your computer, or put it into Hibernation mode before changing the main battery. Removing the battery from the computer To remove the battery: 1 Save your work. 2 Turn off the computer or place it in Hibernation mode according to the instructions in “Using and configuring Hibernation mode” in the electronic user’s guide. 3 Unplug and remove any cables connected to the computer, including the AC adaptor. 4 Close the display panel and turn the computer upside down. 5 Slide the primary battery release latch up, or away from the center of the computer, while at the same time applying light pressure to the battery to slightly pull it away from the computer. 5.375 x 8.375 ver 3.1 Mobile computing Primary battery release latch (Sample Illustration) Unlocking the battery release lock 6 While continuing to lightly pull on the battery, slide the secondary battery release latch down, or away from the center of the computer and then pull the battery out of the computer. Secondary battery release latch (Sample Illustration) Removing the battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock. Failure to do so could possibly result in serious injury. 5.375 x 8.375 ver 3.1 Taking care of your battery Inserting a charged battery To insert a battery: 1 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. 2 Insert the charged battery into the slot until both latchs click. The battery pack has been designed so that you cannot install it with reverse polarity. 3 Turn the computer right side up. 4 Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page 40. 5 Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life. Safety precautions . If the battery pack produces an odor, overheats or changes color or shape while it is being used or charged, turn off the computer’s power immediately and disconnect the power cord/ cable from the power socket. Carefully remove the battery pack from the computer. . Do not try to disassemble a battery pack. . Do not overcharge or reverse charge a battery. Overcharging will shorten its life, and reverse charging could damage it. . Avoid touching the metal terminals of the battery with another metal object. Short-circuiting the battery can cause it to overheat and may cause damage to the battery or the computer. . Do not incinerate a spent battery, as this could cause it to explode and release caustic liquid. . If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. . To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. . A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity. . Charge the battery only in the computer or in a battery charger designated as an approved option. . When you install the battery pack, you should hear a click when it is seated properly. 5.375 x 8.375 ver 3.1 Taking care of your battery . Do not expose the battery pack to fire. The battery pack could explode. Maintaining your battery Fully discharging your battery pack will allow better accuracy of the battery meter. To fully discharge your battery pack: . Periodically, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below: 1 Turn off the computer’s power. 2 Disconnect the AC adaptor and turn on the computer’s power. If it does not turn on, go to step 4. 3 Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged. If the battery light flashes or there is some other warning to indicate a low battery, go to step 4. 4 Connect the AC adaptor to the computer and connect the power cord/cable to a power outlet. The DC-IN or AC power-light should glow green, and the battery light should glow amber to indicate that the battery pack is being charged. If the DC-IN or AC power-light indicator does not glow, power is not being supplied. Check the connections for the AC adaptor and power cord/cable. 5 Charge the battery pack until the battery light glows green. . If you have extra battery packs, rotate their use. . If you will not be using the system for an extended period, more than one month, remove the battery pack. . If you are n...
Эта инструкция также подходит к моделям:Ноутбуки - A9-S9014 (800.67 kb)
Ноутбуки - A9-ST9001 (800.67 kb)
Ноутбуки - A9-ST9002 (800.67 kb)