Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
2 Turn down the volume of the speakers before you turn them on. . Make sure your speakers are designed for computer use. Do not place diskettes on the speakers; their magnetic field may damage the data on the diskettes. Connecting peripheral devices Connecting an external microphone Your VAIO notebook contains an internal microphone. It is also possible to plug in an external microphone. 54 nN Sony Notebook User Guide To connect an external microphone, proceed as follows: Plug the microphone cable (1) into the microphone connector (2) identified by the symbol. . Make sure your microphone is designed for computer use. Connecting peripheral devices Sony Notebook User Guide Connecting a Universal Serial Bus (USB) device You can connect a USB device ( e.g. mouse, floppy disk drive… ) to your computer. You do not need to shut down the computer before connecting or disconnecting a USB peripheral. 55 nNWhen you start your notebook with a USB hub connected to it, make sure that a device is connected to the USB hub. If you encounter problems booting when a USB hub is connected to your notebook, unplug the hub and reboot. Connecting a USB mouse To connect a USB mouse, proceed as follows: Plug the USB mouse cable (2) into the USB connector (1) identified by the symbol. . You can connect the optional Sony USB mouse (PCGA-UMS1 series). As the driver for this mouse is preinstalled on your computer, you can use the mouse by just connecting it. Connecting peripheral devices Connecting a USB floppy disk drive You can connect a floppy disk drive to the USB connector on your computer. 56 nN Connecting the floppy disk drive To connect the floppy disk drive, proceed as follows: Plug the floppy disk drive ( 1) cable into the USB connector (2) identified by the symbol. The VAIO logo on the disk drive should be facing up. Sony Notebook User Guide Connecting peripheral devices 57 nN Sony Notebook User Guide Inserting a diskette To insert a disk, proceed as follows: 1 Hold the diskette ( 2) with the label side facing up. 2 Gently push the diskette into the drive (1) until it clicks into place. Removing a diskette To remove a diskette, proceed as follows: When you finish using the diskette, wait until the LED indicator ( 2) turns off and then press the Eject button ( 1) to remove the diskette. . Before pressing the Eject button, make sure that the LED indicator is turned off. If the diskette does not come out by pressing the Eject button, disconnect the floppy disk drive from the computer. ! Do not press the Eject button while the LED indicator is on. It may damage the diskette. Connecting peripheral devices Sony Notebook User Guide Removing the floppy disk drive To remove the floppy disk drive, proceed as follows: . If your computer is on, wait until the LED indicator turns off and then unplug the USB cable from the 58 nNcomputer. If the floppy disk drive is not removed properly, your system may crash and you may lose data that you did not save before. . If your computer is off, you can directly unplug the USB cable from the computer. . To carry your floppy disk drive when you have finished using it, fold the floppy disk cable into the compartment on the side of the floppy disk drive. Connecting peripheral devices Using a CD-ROM drive You can use the CD- ROM drive supplied with your notebook to read CD- ROMs, Audio- CDs and CD Extras. 59 nN Sony Notebook User Guide Connecting the CD- ROM drive To connect the CD-ROM drive, proceed as follows: 1 Insert the CD- ROM card into the PC Card slot with the SONY logo facing up. 2 If this is not the case, try to reinsert the CD- ROM card. . You cannot insert a disk when the computer is in System Suspend or System Hibernation mode. Depending on the CD-ROM drive, the connection procedures may vary. The driver for the PCGA-CD51/ A optical disc drive is preinstalled on your computer. As no guarantee is supplied with your PCGA- CD51/A optical disc drive, your device is covered by the guarantee of your notebook. Connecting peripheral devices Sony Notebook User Guide Removing the CD- ROM drive If you unplug the CD-ROM drive from the computer when turned on, your system might crash and you might 60 nNlose data that you did not save before. If your computer is turned off, you do not have to follow these instructions. To remove the CD-ROM drive, proceed as follows: 1 Double-click in the taskbar. The Unplug or Eject Hardware dialog box appears. 2 Select the hardware you want to unplug and click Stop. The Stop a Hardware device dialog box appears. 3 Confirm the device to stop and click OK. The Safe to Remove Hardware dialog box appears, confirming the device can be safely removed from the system. 4 Click OK. 5 Click Close to close the Unplug or Eject Hardware dialog box. 6 Remove the device safely. Connecting peripheral devices Connecting a printer You can connect a Windows- compatible printer to your computer to print documents. 61 nN Connecting a printer using the USB connector You can connect a USB pri...