Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The Jog Dial Setting window appears. Click a tab to display the setting items. Activity mode tab Activity mode settings are enabled after you reboot your computer. Using both scroll and application function ( normal acti vities) : This is the normal activity mode setting for Jog Dial Navigator. Using Jog Dial as a mouse wheel: If this is selected, Jog Dial functions as a mouse wheel only. Disabling all the Jog Dial functions. : If this is selected, all the Jog Dial functions are disabled. Activity setting tab This sets the Jog Dial Navigator functions. Scroll range: You can drag the slider left or right to set the scroll range. Handling menu or dialog box by Jog Dial. ( You must reboot Windows): If this is selected, you can operate both pop- up menus and dialog boxes with Jog Dial. This setting is enabled after you reboot your computer. Select JogScript file: This specifies the location and name of JogScript files. Using your notebook nN Sony Notebook User Guide Display/Sound tab This sets the sound effects for the Jog Dial window display and Jog Dial functions. Enabling moving animat ion: This enables or disables the animation effects during Jog Dial window display. Transparency: You can drag the slider left or right to set the transparency of the Jog Dial window. Sound when pressing Jog Dial: This specifies the sound file that is played when the Jog Dial is pressed. Sound when spinning Jog Dial: This specifies the sound file that is played when the Jog Dial is rotated. Sony Notebook User Guide Using your notebook 45 n N Using PC Cards Your computer includes two PC Card slots. PC Cards allow you to connect portable external devices. Inserting a PC Card To insert a PC Card, proceed as follows: 1 Insert the PC Card into one of the PC Card slots with the front label facing up. 2 Gently push the PC Card slot into the connector. The PC Card is automatically detected by your system. The Safely Remove Hardware icon appears in the system tray. . Some devices may not function properly if you repeat Returning to Normal mode from Standby mode or Hibernate mode. The computer will return to its original state if you restart it. The PC Card slots can accommodate (at the same time) two Types I, two Types II or one Type III PC Card. These slots are compatible with Card Bus ports. Use the lower slot for PC Type III cards. Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony Notebook Setup to disable devices. Be sure to use the most recent software driver provided by the PC Card manufacturer. Using your notebook Sony Notebook User Guide If an “ !” mark appears on the Device Manager tab in the System Properties dialog box, remove the software driver and then reinstall it. 46 nNYou do not n eed to s hut down the comp uter before in sertin g o r removing a P C Card . Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC Card in the correct direction. See the manual supplied with your PC Card for more information on use. For some PC Cards, if you alternate between Normal power op eration and Standby or Hibernate power management modes while the card is inserted, you may find that a device connected to yo ur s ys tem is n ot recogn is ed . Reboo t your system to correct the pro blem . Do not carry your notebo ok while to uching the head o f a PC Card, as pressu re o r sh ock may dam age the con nector pins. Removing a PC Card Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 7. To remove a PC Card, procee d as follows: 1 Double- click the Safely Remove Hardware icon in the system tray. The Safely Remove Hardware dialog box appears. 2 Select the hardware you want to unplug. 3 Click Stop. 4 In the Stop a Hardware Device dialog box, confirm that the device can be safely removed from the system. 5 Click OK. A dialog box appears, explaining that it is safe to remove the device. 6 Click OK. 7 Click Close. 8 Push the PC Card release button so that the release button pops out. 9 Push the P C Card release button a second time so that the PC Ca rd pops out. 10 Gently tak e hold of the Ca rd and pull it out of the slot. Using your notebook Sony Notebook User Guide . If you u nplug the P C Card from the co mpu ter when it is s till tu rned on, yo ur system might crash and you might lose data that you did n ot save b efore. 47 nNBefore you remove the PC Card, click the PC Card icon in the taskbar and close the card. Close any applications that use the PC Card before removing the card. Otherwise, data may be lost. While the card is inserted, your computer may not enter the Hibernate power management mode. It may enter Standby mo de. It is reco mmend ed that you remove the card when your computer enters Hibernate m ode b y p res sing the