Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации Sony, модель PCG-FX301

Производитель: Sony
Размер: 1.51 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Printed documentation supplied with your notebook . A Getting Started brochure, where you find a brief description of the items in your box, some specifications of your notebook, and how to setup your notebook; . A Customer Guide, where you find all the basic information you need to start using your notebook, as well as troubleshooting and VAIO- Link information; . Your Sony Guarantee conditions; . A Safety Regulations flyer; . A Modem Regulations flyer. Online user guides on your Documentation CD-ROM . The Sony notebook user guide (hardware guide) explains how to use your computer, connect peripheral devices. It contains a list of specifications of your computer and accessories. . The About the software on your Sony notebook guide (software guide) lists the pre- installed software titles and explains how to use the utility programs and perform basic computer tasks. Go to http:/ /club- vaio.sony- europe. com to find online tutorials about your favorite VAIO software. . The Customer Service Guide gives you complete information on the VAIO- Link Services. Getting help Sony Notebook User Guide Other sources of information . The online help files that accompany your pre- installed software contain instructions on using the 78 nNsoftware. . VAIO-Link website: if you have any problem with your computer, you can access the VAIO- Link web site. Go to: http:/ / vaio- link.com . VAIO-Link Response Centre: Before contacting VAIO- Link Response Centre, try to solve the problem by reading the User Guides and help files for the peripherals or software. . You need to plug in the phone line and configure your modem for use before using the communication features described in this manual. Troubleshooting This section describes how to solve common problems you might encounter when using your notebook. Many problems have simple solutions. Please, try these suggestions before contacting VAIO- Link. About the computer and software My computer does not start . Check that the computer is plugged into a power source and that it is turned on. . Check that the power indicator on the front panel of the computer indicates that the power is on. . Check that the battery packs are inserted properly and that they are charged. . Make sure there is no diskette in the floppy disk drive. . Check that the power cord and all cables are connected firmly. . If you have plugged the computer into a UPS, make sure the UPS is turned on and works. Getting help Sony Notebook User Guide . If you are using an external display, check that it is plugged into a power source and turned on. Check 79 nNthat you have switched to the external display and that the brightness and contrast controls are adjusted correctly. . Moisture condensation may have occurred. Do not use the computer for at least one hour and then turn it on. . If the message Press to resume, to setup appears at the bottom of the display, you need to initialize the BIOS. . Take the battery pack off the notebook, unplug the power cord and plug it again, then turn on the power. The message ’ Press < F1> to resume, < F2> to setup’ appears at startup If the floppy disk drive is empty, proceed as follows to initialize the BIOS: 1 Turn off the computer. 2 Remove any peripheral devices connected to the computer. 3 Turn on the computer and press when the Sony logo appears. The BIOS setup menu screen appears. 4 Set the date (month/day/year) . 5 Press Enter. 6 Press the arrow keys to select System Time. 7 Set the time ( hour:minute: second) . 8 Press Enter. 9 Press the arrow keys to select the Exit menu. 10 Press the arrow keys to select Get Default Values and then press . The Load default configuration now? message appears. 11 Make sure that Yes is selected and then press . Getting help Sony Notebook User Guide 12 Press the arrow keys to select Exit (save changes) and then press . The message Save configuration changes and exit now? appears. 13 Make sure that Yes is selected and then press . 80 nN My computer does not shut down It is recommended to shut down your computer using the Shut Down command on the Windows ® Start menu. Using other methods, including those listed here, may result in loss of unsaved data. If the Shut Down command does not work properly, proceed as follows: . Restart the computer by pressing ++ to enter the Windows Security feature to close any application that can not close normally, and restart your system. The Windows Security dialog box appears. Click Shut Down… . The Shut Down Windows dialog box appears. Select Shut down and click OK. . If this does not work, press the power button and hold it for at least four seconds. This turns off the power. . Unplug the computer from the AC adapter and remove the battery pack from your computer. My computer locks up . If you suspect one application is locking your system, you can try to stop it. To do this, press + + < Delete> once, select the applica...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории