Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
6 When System Setup prompts you to verify the password, type it again and press Enter. Keeping Your Files Safe Keeping Your Files Safe Hard disk drive passwords If the two passwords match, System Setup displays: Registered. If the two passwords do not match, an error message appears. Repeat step 5 and step 6 to enter the password again. 7 If you want to delete the user password, leave the space blank and press Enter twice. System Setup displays: Not Registered. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, press Y. Setting a hard disk drive master and user password in System Setup Make sure you choose a hard disk drive master password you can remember easily. If you set a hard disk drive user password and later forget the password or lose your password diskette, you will need to enter the hard disk drive master password in order to access your hard disk. HINT: The hard disk drive shipped with your computer may not support the master password feature. When you attempt to set master password protection, your computer may alert you that this feature is not supported by your drive. If this happens and you want to establish a master password for your hard disk, contact your network administrator for instructions. To register master and user passwords in System Setup: 1 Click Start, Shutdown, and then OK. The computer shuts down. Keeping Your Files Safe Keeping Your Files Safe Hard disk drive passwords 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,” press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Press the spacebar to select Master + User password mode. 5 Press an arrow key to move to the Master Password section. You must register a Master Password first. 6 Press the spacebar, then type a password of 1 to 16 characters and press Enter. You may use any combination of letters and numbers in your password. 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered for both User and Master passwords. If the two passwords do not match, an error message appears. Repeat step 6 and step 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, press Y. Changing the master and user passwords in System Setup To change the master and user passwords in System Setup: 1 Click Start, Shutdown, and then OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When Keeping Your Files Safe Keeping Your Files Safe Hard disk drive passwords the fo...
Эта инструкция также подходит к моделям:Ноутбуки - Tecra M3 (3.53 mb)
Ноутбуки - Tecra M3-S212TD (3.53 mb)
Ноутбуки - Tecra M3-S311 (3.53 mb)
Ноутбуки - Tecra M3-S316 (3.53 mb)