Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The TOSHIBA PC Diagnostic Tool window appears. 2 Click the Diagnostic Tool tab. (Sample Image) TOSHIBA PC Diagnostic Tool window 3 Select the devices that you would like to test by clicking the check box that appears to the left of the device. NOTE Click the + (plus) and - (minus) symbols to expand and collapse the categories. 4 Click Start Diagnostics when you are ready to begin the tests. Utilities Utilities TOSHIBA HDD Protection Utility TOSHIBA HDD Protection Utility The TOSHIBA HDD Protection Utility controls your computer’s hard disk drive (HDD) protection feature, which parks the HDD whenever motion is detected on the computer. Using this utility, you can enable or disable hard disk drive (HDD) protection, and set the motion detector’s sensitivity level for AC power and battery power operation. To use the TOSHIBA HDD Protection Utility: 1 Click Start, All Programs, TOSHIBA, Utilities, and then HDD Protection Settings, or click the HDD Protection icon in the Protect & Fix tab of TOSHIBA Assist. The TOSHIBA HDD Protection Properties window appears. (Sample Image) TOSHIBA HDD Protection Properties window 2 Select ON to enable HDD protection, or select OFF to disable HDD protection. 3 Set the battery and AC power detection levels as desired. 4 Click OK. Utilities Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: 1 Click Start, Control Panel, Hardware and Sound, and then under Devices and Printers, click Mouse, or click the Mouse icon in the Optimize tab of TOSHIBA Assist. The Mouse Properties screen appears. The settings you can change are divided into these categories: . Buttons . Pointers . Pointer Options . Wheel . Hardware . Device Settings You may see additional categories depending on your particular pointing device. 2 Adjust the settings as desired, then click OK. Utilities Utilities TOSHIBA Hardware Setup TOSHIBA Hardware Setup TOSHIBA Hardware Setup is the TOSHIBA configuration management tool available through the Windows® operating system. To access it: . Click Start, All Programs, TOSHIBA, Utilities, and then HWSetup, or click the TOSHIBA Hardware Settings icon in the Optimize tab of TOSHIBA Assist. The TOSHIBA HWSetup screen appears. (Sample Image) TOSHIBA HWSetup screen – General tab options The TOSHIBA HWSetup screen may have the following tabs: . Advanced—Allows you to enable/disable the ports and features on your computer . Boot Setting—Allows you to change the sequence in which your computer searches the drives for the operating system You can also manually choose the Boot Setting by pressing the power button to power on the computer, then quickly pressing the F12 key. Select the boot device by pressing the arrow keys, then pressing the Enter key. NOTE Since the system is a quick-booting system, you must press the keys immediately after pressing the power button. Utilities Utilities TOSHIBA Hardware Setup . CPU—Allows you to enab...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite R845-S80 (3.66 mb)
Ноутбуки - Satellite R845-S85 (3.66 mb)
Ноутбуки - Satellite R845-S95 (3.66 mb)
Ноутбуки - Satellite R845-ST6N01 (3.66 mb)