Оценок - 3, средний балл: 3.3 ( )

Производитель: Toshiba Размер: 3.55 mb Название файла: Язык инструкции:

Inserting a compact disc To insert a compact disc into the drive: 1 Make sure the computer is turned on. 2 Make sure the in-use indicator light is off. 3 Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch). Sample drive tray fully extended HINT: The drive will not open if the computer’s power is off. 4 Grasp the tray and pull it fully open. 92 Learning the Basics Using the DVD-ROM or multi-function drive 5 6 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for CD or DVD Discs” on page 93. Place the disc carefully in the disc tray, label side up. Sample positioning the disc in the drive 7 Gently press the disc onto the center spindle until you feel it click into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. 8 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. 9 Push the disc tray in by pressing gently on the center of the tray until it clicks into place. You are ready to use the disc. Learning the Basics 93 Using the DVD-ROM or multi-function drive Removing a disc with the computer on To remove a compact disc (CD or DVD) with the computer turned on: 1 Press the eject button on the drive. Do not press the eject button while the in-use indicator light is glowing. Doing so could damage the disc or the drive. Also, if the disc is still spinning when you open the disc tray, wait for it to stop spinning before you remove it. 2 Pull the tray until it is fully open, remove the disc, and place it in its protective cover. 3 Gently push the tray in to close it. Removing a disc with the computer off 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. 2 Gently pull the tray out until it is fully open, remove the disc, and place it in its protective cover. 3 Gently push the tray in to close it. Caring for CD or DVD Discs . Store your discs in their original containers to protect them from scratches and keep them clean. . Do not bend a disc or place heavy objects on top of it. 94 94 Learning the Basics Using PC Cards . Do not apply a label to or otherwise mar the surface of a disc. . Hold a disc by its outside edge. Fingerprints on the surface can prevent the DVD-ROM drive or multifunction drive from reading the data properly. . Do not expose discs to direct sunlight or extreme heat or cold. . To clean a disc that is dirty, wipe it with a clean,...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: