Оценок - 2, средний балл: 4 ( )

Производитель: Toshiba Размер: 2.57 mb Название файла: Язык инструкции:

Your computer has one PC Card slot and supports Type II PC Cards. Check the documentation that came with the PC Card to see if it conforms to the PCMCIA 2.1 standard, or later. Other cards may work with your computer, but are likely to be much more difficult to set up and use. PC Card supporting software PC Cards require Card and Socket Services software — a set of programs that acts as a translator between the PC Card and the computer, and that makes hot swapping (switching cards while the computer is on) possible. The operating system provides the Card and Socket Services for your PC Card. Even if your PC Card comes with its own version of Card and Socket Services, you should use the files included in the operating system. Inserting a PC Card NOTE Use caution when lifting or turning your computer. Failure to do so may result in damage to components, such as cables, attached to your computer, or to the computer itself. Before you insert a PC Card, refer to the documentation that comes with the card to see if you need to do anything before you insert it. To insert a PC Card: 1 Turn off the computer. You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the Safe to Remove Hardware message appears, it is safe to remove the PC Card. 2 Align the card connectors with an available PC Card slot and carefully slide the card into the slot until it locks into place. Sample inserting a PC Card To avoid damaging the PC Card or the computer, do not force the card into the PC Card slot. Removing a PC Card 1 Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. 2 To remove the PC Card, press the eject button once. 3 Remove the PC Card and store it properly. Sample removing a PC Card Hot swapping One of the great things about PC Cards is that you can replace one PC Card with another while the computer is on. This is called “hot swapping.” Although you can insert a PC Card at any time, to avoid data loss never remove a card while it is in use. For example: . Never remove a hard disk card while the system is accessing it. . Never remove a network card while you are connected to a network. Before removing a PC Card, stop it by clicking the Safely Remove Hardware icon on the System tray. Once the PC Card has stopped, you can safely remove it. See “Removing a PC Card” on page 148. Never swap modules when the computer is in Hibernation or Standby mode. This is known as “warm swapping” and is not supported with this computer For more information on Hibernation and Standby modes, see “Using Hibernation Mode” on page 103 and “Using Standby Mode” on page 107 Using the Bridge Media slot Your computer is equipped with a Bridge Media Slot, which supports the use of Memory Stick or Memory Stick PRO media, Secure DigitalTM (SDTM) Cards, SmartMedia™, or xD-Picture Cards. This media can be used with a variety of digital products: digital music players, cellular phones, PDAs, dig...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: