Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Connecting an HDMI™-compatible television or external display device To connect an HDMI™-compatible television or external display device to the computer: . Connect one end of an HDMI™ cable (not included with your computer) to the HDMI™ Out port on the side of your computer, and then connect the other end of the cable to your television. Refer to the manual that came with the television for more information. Your computer will automatically detect the external display device. Connecting to a TV using HDMI™-CEC (Available on certain models.) HDMI™-CEC (Consumer Electronics Control) is a standard in the CE Industry which allows devices to work together over an HDMI™ cable. Toshiba computers with HDMI™-CEC include a Toshiba utility. (This may need to be installed via the Toshiba Application Installer). For instructions, see “TOSHIBA Application Installer” on page 155. The HDMI™-CEC utility is dedicated to take advantage of its capabilities which can allow you to: . Use a TV remote control to output the computer screen onto the TV screen. . Use a TV remote control to launch, operate and close applications on your computer. . Turn on a TV when the HDMI™ output is selected using the Fn + F5 key. . Switch the video output (HDMI™ or LCD) when executing certain desktop icons. . Enable/Disable the HDMI™-CEC function on the computer. For more detailed HDMI™-CEC information visit pcsupport.toshiba.com. Getting Started Getting Started Using external display devices Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 Read the directions that came with the monitor to see if you first need to install new software. 2 Connect the monitor’s video cable to the RGB (monitor) port on the side of the computer. 3 Connect the device’s power cable to a live electrical outlet. 4 Turn on the external device. Your computer will automatically detect the external display device. NOTE In the future you can change the display settings by pressing Fn + F5, or by configuring the display properties settings. Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. NOTE Some modes are only available with the appropriate device attached and turned on. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. Briefly pause each time you press the F5 key to allow time for the display to change. This hot key cycles through the settings...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite A660-BT2G22 (3.83 mb)
Ноутбуки - Satellite A660-BT2G23 (3.83 mb)
Ноутбуки - Satellite A660-BT2G25 (3.83 mb)
Ноутбуки - Satellite A660-BT2N22 (3.83 mb)