Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The Shut Down menu appears. 2 Click Shut down. The computer shuts down completely. 3 Remove the memory module, following the instructions in “Removing a memory module” on page 53. 4 Reinstall the memory module, following the instructions in “Installing a memory module” on page 48, and making sure the module is seated properly. 5 Check for the error again. 6 If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. If Something Goes Wrong 175 Resolving a hardware conflict Power and the batteries Your computer receives its power through the AC adaptor and power cord/cable or from the system batteries (battery, optional secondary battery, and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adaptor or power cord/cable will neither power the computer nor recharge the batteries. Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adaptor and power cord/cable. Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance. The AC adaptor and power cord/cable work correctly, but the battery will not charge. The battery does not charge while the computer is consuming full power. Try turning off the computer. The battery may not be inserted correctly in the computer. Turn off the computer, remove the battery, clean the contacts with a soft dry cloth (if necessary) and replace the battery. See “Removing the battery from the computer” on page 112. The battery may be too hot or too cold to charge properly. If you think this is the probable cause, let the battery reach room temperature and try again. If the battery has completely discharged, it will not begin charging immediately. Leave the AC adaptor and power cord/cable connected, wait 20 minutes and see if the battery is charging. If the battery light is glowing after 20 minutes, let the computer continue charging the battery for at least another 20 minutes before you turn on the computer. If the battery light does not glow after 20 minutes, the battery may have reached the end of its useful life. Try replacing it. The battery appears not to power the computer for as long as it usually does. If you frequently repeat shallow charge and discharge, the battery meter may become inaccurate. Let the battery discharge completely, then try charging it again. If Something Goes Wrong 176 Resolving a hardware conflict Check the power options via your Power Plans (see “Power Plans” on page 110 for mor...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite A130-ST1311 (3.71 mb)
Ноутбуки - Satellite A130-ST1312 (3.71 mb)
Ноутбуки - Satellite A135-S2246 (3.71 mb)
Ноутбуки - Satellite A135-S2256 (3.71 mb)