Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
. To move it to the left side, slide your finger from right to left. NOTE: Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. Once you’ve positioned your cursor, you can select an object on the display screen by double-tapping the TouchPad or clicking the control buttons. For more on the TouchPad, see “Lesson 2: Using the TouchPad and control buttons together” on page 135. You can disable or enable the TouchPad. See “Disabling or enabling the TouchPad” on page 67. Primary and secondary control buttons The control buttons are below the TouchPad and are used like the buttons on a mouse. The primary control button is the button on the left and corresponds to the left mouse button. To double-click, press the primary button twice in rapid succession. The secondary control button is the button on the right and corresponds to the right mouse button. Check your program’s Getting Started Getting Started Using the computer for the first time documentation to find whether it uses the secondary mouse button. For more on the primary and secondary control buttons, see “Lesson 2: Using the TouchPad and control buttons together” on page 135. Toshiba Scroller The Toshiba Scroller, located between the primary and secondary control buttons, allows you to scroll pages vertically with the Scroller: . Roll the Scroller with a forward motion to scroll up . Roll the Scroller with a backward motion to scroll down Disabling or enabling the TouchPad The TouchPad is enabled by default. To change the enable/ disable TouchPad setting: 1 Click Start, Control Panel. The Control Panel window appears. 2 Click Printers and Other Hardware. 3 Click Mouse Properties. The Mouse Properties window appears. 4 Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. 68 68 68 Using the computer for the first time Sample Mouse Properties window 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes. 8 Close the Printers and Other Hardware window. 9 Close the Control Panel window. You can also use a hot key to disable or enable the TouchPad. See “Disabling or enabling the TouchPad” on page 265. Getting Started Getting Started Using the computer for the first time Setting up a printer NOTE: Follow the manufacturer’s instructions for connecting a printer to your computer. If your printer has not been detected automatically when connected to the computer, you must install the printer driver for the model of printer that is connected to your computer. You install the printer driver either by following the instructions indicated in your printer guide, or by using the operating system’s Add Printer Wizard. If you plan to set up a printer later, close or cancel the Add Printer W...
Эта инструкция также подходит к моделям:Ноутбуки - Satellite 2400-S201 (3.15 mb)
Ноутбуки - Satellite 2400-S202 (3.15 mb)
Ноутбуки - Satellite 2400-S251 (3.15 mb)
Ноутбуки - Satellite 2400-S252 (3.15 mb)