Оценок - 1, средний балл: 5 ( )

Производитель: Toshiba Размер: 3.47 mb Название файла: Язык инструкции:

This button requires power to operate. CAUTION: Never press the eject button or turn off the computer while the activity light is glowing. Doing so could damage the disc or the drive. The manual eject button allows you to manually open the disc tray when power to the computer and the drive is off. CAUTION: Never use a pencil to press the manual eject button. Pencil lead can break off inside the computer and damage it. Instead, use a slim object such as a straightened paper clip. HINT: When the computer is off and the DVD-ROM or DVD-ROM/ CD-RW drive is on, press the stop/eject control button to eject a disc. The computer needs to be in CD/DVD mode for this command to work properly. Learning the Basics Learning the Basics Playing a CD or DVD CD/DVD control buttons The control buttons on the front edge of the computer enable you to play audio CDs when the computer is off. You can also use them to play CDs and DVDs when the computer is on. Previous Next Play/Pause Stop/Eject track track CD/DVD control buttons in front of the computer The mode button switches between the CD/DVD and digital audio modes. You can lock the mode to its current setting by pressing and holding the mode button for four seconds. When the mode button is locked, you cannot switch between the CD/DVD and digital audio modes. To unlock the mode button, press and hold it for four seconds. The previous track button returns to the preceding track on the disc. The next track button skips to the following track on the disc. . Mode - The left side of the indicator panel displays one of the following icons depending on what mode your computer is in: CD/DVD control Digital audio The play/pause button starts playing the disc or makes it pause if currently playing. The stop/eject button stops a disc that is currently playing. 88 88 88 Playing a CD or DVD You can eject a disc by pressing the stop/eject button twice. Use this method to eject a disc when the computer is turned off and the sound subsystem is turned on. CD/DVD control and digital audio control The following chart describes CD/DVD control and digital audio mode. CD /DVD Mode Digital Audio Mode Power is off and you If a CD is in the The operating sys press Play/Pause drive, the system tem starts, the Media enters CD player Player starts and the mode and operates as digital audio file a stand-alone CD begins to play. player. If a DVD is in the drive, the operating system starts and the DVD player starts. While in CD/DVD DVD-ROM drive mode, you press the power turns off mode button Operating system is If a CD is in the Media Player starts running and you drive, the Media and the digital audio press Play/Pause Player starts and the file begins to play. digital audio file begins to play. If a DVD is in the drive, WinDVD starts and the DVD begins to play. Learning the Basics Learning the Basics Playing a CD or DVD Inserting a disc WARNING: Before playing an audio CD or a DVD, turn the volume down. Playing the disc at maximum volume could damage your ears. To turn the volume down, use the volume control dial or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control). 1 If the computer is turned on, press the eject button on the DVD-ROM or DVD-ROM/CD-RW drive. Pressing the eject button The disc tray partially opens. CAUTION: To avoid damaging a disc or losing data, check that the disk activity light is off before opening the disc tray. 2 Grasp the disc tray and pull it fully open. 3 Hold the disc by its edges and check that it is clean and free of dust. CAUTION: Handle discs carefully. Avoid touching the surface of the disc. Grasp it by its center hole and edge. If you handle the disc incorrectly, you could lose data. 90 90 90 Playing a CD or DVD 4 Carefully place the disc in the empty tray with its label facing up. Inserting a disc CAUTION: Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it. Doing so could cause the drive to malfunction. 5 Gently press the center of the disc onto the spindle until it locks into place. Spindle Correct position Disc Incorrect position Incorrect position Positioning the disc on the spindle CAUTION: Make sure the disc is properly positioned on the spindle. If you position the disc incorrectly, it can jam the disc tray. 6 Close the disc tray by pressing gently on the center of the tray until it clicks, indicating that it is locked. Learning the Basics Learning the Basics Playing a CD or DVD Removing compact discs To remove a compact disc (CD or DVD) with the computer turned on: 1 Press the eject button on the drive. CAUTION: Do not press the eject button while the in-use indicator light is glowing. Doing so could damage the disc or the drive. Also, if the disc is still spinning when you open the disc tray, wait for it to stop spinning before you remove it. 2 Pull the tray until it is fully open, remove the disc, and place it in its protective cover. 3 Gently push the t...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: