Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
You can also specify an amount of time after which the computer automatically goes into Hibernation mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. 1 Click Start, Control Panel, and then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click the Setup Action tab. 88 88 Getting Started Turning off the computer 4 Select Hibernation for the options you want. . When I press the power button Set this option to Hibernate if you want the computer to go into Hibernation mode when you press the power button. . When I close the lid Set this option to Hibernate if you want the computer to go into Hibernation mode when you close the display panel. 5 Click Apply. 6 Click OK. NOTE For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 270. Once the computer is configured, you can place it into Hibernation mode by either pressing the power button or closing the display panel, depending on the Hibernation options set. Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the on/off light glows blue. The computer returns to the screen(s) you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel. Getting Started 89 Turning off the computer Using and configuring Standby mode To turn off the computer using the Standby command, click Start, Turn off computer, and then select Stand By. (Sample Image) Turn off computer Windows® dialog box The computer saves the status of all open programs and files, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Standby mode. Configuring Standby mode options You can place the computer into Standby mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Standby mode. To use any of these methods, you first need to enable them in Toshiba’s Power Saver utility. 1 Click Start, Control Panel, and then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click the Setup Action tab. 90 90 Getting Started Turning off the computer 4 Select Standby for the options you want. . When I press the power button Set this option to Standby if you want the computer to go into Standby mode when you press the power button. . When I close the lid Set this option to Standby if you want the computer to go into Standby mode when you close the display panel. 5 Click Apply. 6 Click OK. NOTE For more information about the Power Saver utility, see “TOSHIBA Power Saver” on page 270. Once the computer is configured, you can place it into Standby mode by either pressing the power button or closing the display panel, depending on the Standby options set. Starting again from Standby mode To start up the computer from Standby mode, press the power button until the on/off light glows blue. The computer returns to the screen(s) you were using. If you place the computer in Standby mode by closing the display panel, you can start it again by opening the display panel. Closing the display panel After you have turned off the computer, close the display panel to keep dust and dirt out of the computer. Getting Started 91 Caring for your computer Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see “Taking care of your battery” on page 130. Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Moving the computer Before moving your computer, even across the room, make sure all disk activity has ended (the drive indicator light stops glowing) and all external peripheral cables are disconnected. Do not pick up the computer by its display panel or by the back (where the ports are located). Doing so could damage the system. 92 92 Getting Started Caring for your computer Using a computer lock You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: 1 Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. 2 Pass the locking end through the loop. 3 Insert the cable’s locking end into the security lock slot on your computer, then engage the locking device. The computer is now securely locked. (Sample Illustration) A...
Эта инструкция также подходит к моделям:Ноутбуки - G35-AV660 (3.96 mb)