Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Use care when inserting or removing a memory card from the slot. Do not force the memory card in or out of the slot. The SD memory card slot on your computer does not support the high-speed data transfer feature of the SD memory card. Your computer has been tested and found compatible only with major memory card media available as of January 2006. However, not all memory card media that meet the same conditions as the compatible media are guaranteed of compatibility. 5454n N Using Your VAIO Computer Inserting a Memory Card To insert a memory card 1 Locate the SD memory card slot on the front of the computer. 2 Hold the memory card with the arrow facing upward and pointing toward the memory card slot. 3 Carefully slide the memory card into the slot until it clicks into place. Do not force the card into the slot. . If the memory card does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction. Removing a Memory Card ! Do not remove a memory card while the Media Access indicator light is on. The card or its data may become damaged. To remove a memory card 1 Check that the Media Access indicator is off. 2 Press the extended part of the memory card, causing it to extend out from the slot. 3 When the card extends, carefully pull it out of the slot. 5555n N Using Your VAIO Computer Using the Internet Setting Up a Dial-up Internet Connection Before you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (may not supplied). Once you have set up your telephone cable connection, you're ready to connect to the Internet. To connect a telephone cable 1 Plug one end of the phone cable (1) into the modem port on the computer. 2 Plug the other end into the wall jack (2). . Your computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem. If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly. To set up a dial-up connection to the Internet 1 Click Start, point to All Programs, Accessories, Communications, and click New Connection Wizard. The New Connection Wizard appears. 2 Click Next. If the Location Information window appears, follow the on-screen instructions. 3 If it is not already selected, click to select Connect to the Internet, and click Next. 4 Follow the on-screen instructions. 5656n N Using Your VAIO Computer Using Wireless LAN (WLAN) Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings. The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still access information, Internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to another. You can communicate without an access point, which means that you can communicate between a limited number of computers (ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure network (infrastructure). . In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the WLAN functionality, read the Regulations Guide carefully. WLAN uses the IEEE 802.11a*/b/g standard, which specifies the used technology. The standard includes the encryption method: Wired Equivalent Privacy (WEP), which is a security protocol and WiFi Protected Access (WPA - Proposed jointly by the IEEE and Wi-Fi Alliance, WiFi Protected Access is a specification of standards based, interoperable security enhancements that increase the level of data protection and access control for existing WiFi networks. WPA has been designed to be forward compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption TKIP (Temporal Key Integrity Protocol) in addition to user authentication using 802.1X and EAP (Extensible Authentication Protocol)). Data encryption protects the vulnerable wireless link between clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks, and authentication. * See the online Specifications to see whether your model supports the IEEE 802.11a standard. 5757n N Using Your VAIO Computer Wireless LAN devices using the IEEE 802.11a standard and the ones using the IEEE 802.11b or g standard cannot communicate because the frequencies are differen...
Эта инструкция также подходит к моделям:Ноутбуки - VGN-TX3HRP_W (1.31 mb)
Ноутбуки - VGN-TX3XP_B (1.31 mb)
Ноутбуки - VGN-TX3XP_L (1.31 mb)
Ноутбуки - VGN-TX3XRP_B (1.31 mb)