Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации Sony, модель VGN-TT46XG

Производитель: Sony
Размер: 3.14 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


. You may hear a soft hissing noise while the noise canceling function is enabled. This is just operational noise that the function generates and does not indicate a malfunction. . You may feel that the noise canceling function has little effect or ambient noise seems even louder, depending on the type of noise or the degree of quietness in your environment. In such a case, disable the noise canceling function. . Use of a mobile phone may cause radio interference with the noise canceling headphones. When using the headphones, keep mobile phones away from the headphones. . Plugging or unplugging the noise canceling headphones generates noise. This is normal and does not indicate a malfunction. Be sure to take off the headphones from your ears before plugging or unplugging the headphones. . Enabling/disabling the noise canceling function or enabling/disabling sound with the Windows volume controls generates noise. This is caused by switching the noise canceling circuit and does not indicate a malfunction. . Be sure to use the supplied noise canceling headphones. You can plug the headphones supplied with a Walkman® to your computer but the noise canceling function of the computer will not work well with such headphones. Using Peripheral Devices > Using the Noise Canceling Headphones n 92 N Connecting the Noise Canceling Headphones To connect the noise canceling headphones Plug the headphones cable into the headphones jack i. The icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message pops up from the icon. ! Before plugging the headphones cable to the headphones jack, make sure that the embossed marking on the plug faces upward. . When the icon is on the taskbar, the noise canceling function is disabled. Right-click the icon and select Enable Noise Canceling Function from the menu. If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 94) to change the settings. Using Peripheral Devices > Using the Noise Canceling Headphones n 93 N Adjusting the Effect of the Noise Canceling Function The noise canceling headphones supplied with your computer is configured to yield the optimum effect by default. If you feel that the noise canceling function is not fully in effect, you may be able to adjust the effect with the Noise Canceling Control slider on the Noise Canceling Headphones window. To adjust the effect of the noise canceling function 1 Right-click the icon on the taskbar and select Settings. The Noise Canceling Headphones window appears. . If no icon is on the taskbar, see What to do if the icon and the balloon do not appear (page 94) to change the settings. 2 Drag the Noise Canceling Control slider toward Mic+ or Mic- to select your desired noise canceling level. . The slider should be at the center of the range to yield the optimum level. Dragging the slider all the way to Mic+ does not bring the noise canceling function fully into effect. 3 Click Apply. 4 Confirm that the noise canceling effect is satisfactory and then click OK. Using Peripheral Devices > Using the Noise Canceling Headphones n 94 N What to do if the icon and the balloon do not appear When the noise canceling function icon ( / ) is not on the taskbar and the balloon message does not pop up from the icon, change the noise canceling function settings. To display the balloon message and the icon 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Manage audio devices under Sound. 4 On the Playback tab, double-click the speakers or headphones icon. 5 Click the Enhancements tab. 6 Click to select the Noise Canceling Function check box and click Modify Settings. . If the Disable all enhancements check box is selected, click to cancel the check box. 7 Click to select the Display an icon for the noise canceling headphones in the task tray or Display a message when noise canceling headphones are connected check box. 8 Click OK. Using Peripheral Devices > Connecting a Docking Station n 95 N Connecting a Docking Station Attaching a docking station enables you to connect additional peripherals to your computer, such as a printer and an external display. A docking station is not supplied with your computer and is available as an optional accessory. Locating Ports on the Docking Station A DC IN indicator Illuminates while the docking station is powered. B IN USE indicator (page 99) C UNDOCK button (page 99) D DC IN port (page 96) E Network (LAN) port (1000BASE-T / 100BASE-TX / 10BASE-T) (page 56) F Hi-Speed USB (USB 2.0) ports* (page 115) G DVI-D port (page 105) H MONITOR port (page 105) * Support high-/full-/low- speeds. ! The docking station can be powered only through the AC adapter supplied with your computer. Do not unplug the AC adapter from the docking station and the AC outlet while using the docking station. This may cause data damage or hardware malfunctions. Using Peripheral Devices > Connecting a Docking Station n 96 N Attaching Your Comput...

Эта инструкция также подходит к моделям:
Ноутбуки - VGN-TT4 (3.14 mb)
Ноутбуки - VGN-TT46MRG (3.14 mb)
Ноутбуки - VGN-TT46VRG (3.14 mb)
Ноутбуки - VGN-TT46ZG (3.14 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории