Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Warning To assure comtinued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device is Class В verified to comply with Part 15 of FCC Rules when used with Panasonic Notebook Computer. For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Interface Cable Use of an interface cable longer than 3 in (I 18.11 inch) is not recommended. Schnittstellenkabel Verwendete Schnittstellenkabel sollten eine Länge von 3 Metern möglichst nicht überschreiten. ENGLISH Thank you for purchasing the port replicator for the Panasonic notebook computer series CF-35. The port replicator is equipped with the same connection terminals as the computer (with the exception of the infrared communication port). By connecting your peripheral devices to the port replicator, you can save yourself the trouble of having to connect and disconnect several cables every time you transport the computer. Some of the illustrations included with the text may differ slightly in shape from the actual items included in the kit in order to make the explanation easier to understand. Microsoft®, MS-DOS® and Windows® are either registered trademarks of Microsoft Corporation in the United States and/or other countries. Specifications/Names of Parts The port replicator is equipped with the same connection terminals as the computer (with the exception of the infrared communication port). It allows your peripheral devices to function exactly as if they were connected directly to the computer. (Refer to "Names and Functions of Ports” in the "Operating Instructions" accompanying the computer.) (^Microphone Jack) (^Ext. Mouse Connecter) (Headphone Jack) (Ext. Display Port *) (Ext. Keyboard Connecte^) Front/Right Side (Security Lock) Expansion Bus Port) ((Cap Holder) The protective cap from the expansion bus port should be placed here when (he port replicator is connected to the computer, (This will prevent it from getting lost.) This connects to the expansion bus port on the bottom of the computer. Be sure to keep it covered with the supplied protective cap when ihc port replicator is not connected to the computer. Expansion Bus Port Protective Cap (Accompanying the port replicator) Lever Pull up on the lever to release the computer. Specifications Item Description Power Supply Input DC 15.1 V ( Do not use other than the specified AC adapter) Expansion Bus Connector 100-pin Physical Demensions (Width X Height X Depth) 352 mm X 150 mm X 62 mm (13.83" X 5.89" X 2.43") Weight Approx. 800 g (1.76 lbs) Operating Environment Temperature / Humidity 5 to 35 °C (41 to 95 °F) /30 to 80% RH (no condensation) Refer to ’’Specifications" in the "Operating Instructions" accompanying the computer for information on the connectors and ports on the rear panel of the port replicator. Connecting/Disconnecting r Do not connect or disconnect the port replicator while the computer is in the suspend or hibernation mode. Connecting 1 2 Power off the computer, and disconnect all cables from the computer. Connect the plug of the AC adapter that came with the computer to the DC-IN jack of the port replicator and plug the other end into an AC outlet. i Do not use other than the specified AC adapter. ► Refer to the "Operating Instructions" that came with the computer for information on proper handling of the AC adapter and AC cord. ^ Remove the expansion bus port protective cap and place it in the cap holder to prevent its getting lost. ^ Turn over the computer and slide the cover of expansion bus port to open it. ^ Insert the computer into the port replicator. Do not attempt to make connections if the cover is closed or if there is any object between the computer and the port replicator. Doing so could damage the bottom of the computer and the port replicator._J Press down on the computer from the top lightly. This will cause the expansion bus port on the bottom of the computer to connect to the expansion bus port of the port replicator. Comfirm that the hook of the port replicator has snapped into place on the ventilation hole of the computer. Ventilation Г' • Do not attempt to move the port replicator when it is connected to the computer. • If the computer malfunctions while the port replicator is attached, refer first to the 'Troubleshooting" section of the computer's "Opera...