Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Until the correct password entered the computer will not operate. # The power saving function is factory set, so if there is no input from a key, the touch pad, the tablet button, the touchscreen or an external mouse (when one is connected) for a certain interval of time, the power to the LCD and hard disk may be turned off. The LCD will resume operation when the touch pad, the touchscreen or an external mouse (when one is connected) is used or a key or the tablet button is pressed. The power to the LCD may be turned off even when an application software is being installed. In this case, because it is conceivable that a selection dialog box will be shown, do not pressC Space ) or C Enter) to attempt to resume from this condition as doing so may trigger a selection, but instead, press a key unrelated to the direct triggering of a selection, like C Ctrl ). In addition, when the computer is left alone, it automatically enters the standby or hibernation mode (C^3 Iwunu!Lcc “Standby/Hibernation Functions”). The computer will resume by sliding the power switch. When switching to a different user with the Fast User Switching function, it may not be possible to set the settings of the display. In this case, log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more. 4 Select your application. You are able to start working on your computer. Xnote) 16 Shutting Down (power off your computer) This procedure is for shutting down the computer without using the standby or hibernation function (q= mS* “Standby/Hibernation Functions”). 1 Save important data and close each application. Select [Start] - [Shut Down]. Select [Start] - [Turn Off Computer]. 3 Select [Shut down], then select [OK]. Select [Turn Off]. Your computer will power off automatically. # Restarting your computer (without shutting down) mmsmm Select [Restart], then select [OK], tmguim) Select [Restart]. Do not do the following during the shutdown/restart procedure. • Connecting or disconnecting the AC adaptor. • Touching the power switch or the tablet buttons. • Performing any keyboard, touch pad, touchscreen (or external mouse) operations. • Closing the display. Xnote> To shut down using the keyboard, Press ( ft),OH and select [Shut down] with f+T) (T) (T), then press ( Enter ). Press ©>® , and select [Turn Of!] with f+T) (T) QT), then press C Enter). To quickly resume computer operation after shutting down, The standby or hibernation function is available. (G^ “Standby/Hiberna- tion Functions”) (To next page) 17 Operation Operation Starting Up/Shutting Down 4 Close the display. (T) Close the display. (2) Pull up on the latch A. Position the latch B on the display side, then bring the latch A down to fix the display in place. 18 Touch Pad (Basic Operation) Work Surface Use the touch pad to move the cursor on the display and perform normal computer operations. rHandling-the-Touch-Pad-i • If a key combination such as CED + CrD is used while the pad is being touched, the function of the key combination may not work. In addition, it is possible that control of the cursor will be lost and the cursor will not show proper movements. In such cases, the computer has to be restarted by using the keyboard (e.g., ® )• • The touch pad is designed to be used with a fingertip only. Therefore, avoid the following actions, which may cause damage to the work surface. • Placing any object on the work surface • Pressing down forcefully with sharp-pointed objects (e.g., nails) or hard objects that can leave marks (e.g., pencils and ball point pens) • Try to avoid having any harmful substances such as oil, come in contact with the touch pad. The cursor may not work properly in such cases. • When the touch pad becomes dirty: Wipe to remove dirt by using a dry soft cloth such as gauze or a soft cloth first applied with detergent diluted with water and then thoroughly wrung. Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the surface, e.g., discoloration. In addition, do not use commercially-available household cleaners and cosmetics, as they may contain components harmful to the surface. 19 Operation Operation Touchscreen (Basic Operation) Your computer is equipped with a touchscreen function allowing you to perform the same operations as the touch pad or mouse by touching the surface of the display with the stylus (included). (The following explanation gives one example (for the default settings).) The operation settings can be changed. For detailed information, ([Jp Manual* “Touchscrecn (Advanced)”. Moving the cursor # Clicking Cursor Stylus # Double-clicking • Dragging Touch and hold the object (i. e. file or icon), move the stylus on the surface (dragging the object to the desired location), then release the stylus. Xnote> To right-click: 1 Select |T1 on the taskbar. |~L~j changes to pTI. 2 Select the object you...