Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
NOTE: Scanning will begin as soon as the scan button is checked. To cancel scan mode: 1. Select a server if OSCAR is open. -or- Move the mouse or press any key on the keyboard if OSCAR is not open. Scanning will stop at the currently selected server. -or- If OSCAR is not open, press Print Screen. The Main dialog box will appear. 2. Click Commands. The Commands dialog box appears. 3. Clear Scan Enable. Setting Console Security Use the Security dialog box to set security on your local port console. You can establish a screen saver mode that engages after your console remains unused for a specified Inactivity Time. Once engaged, your console will remain locked until you press any key or move the mouse. You will then need to type in your password to continue. Use the Security dialog box to lock your console with password protection, set or change your password and enable the screen saver. Chapter 3: Local Port Operation 39 Chapter 3: Local Port Operation 39 To access the Security dialog box: 1. If OSCAR is not open, press Print Screen. The Main dialog box will appear. 2. Click Setup - Security. The Security dialog box appears. Figure 3.13: Security Dialog Box To set or change the password: 1. Single-click and press Enter or double-click in the New text box. 2. Type the new password in the New text box and press Enter. Passwords must contain both alpha and numeric characters, are case sensitive and may be up to 12 characters long. Legal characters are: A-Z, a-z, O-9, space and hyphen. 3. In the Repeat box, type the password again and press Enter. 4. Click OK to change only your password, and then close the dialog box. NOTE: If you should lose or forget your password, you will need to return your switch to have it reset to the factory default settings. See Appendix F: Technical Support for contact information. To password protect your console: 1. Set your password as described in the previous procedure. 2. Select Enable Screen Saver. 40 DSR Installer/User Guide 40 DSR Installer/User Guide . Type the number of minutes for Inactivity Time (from 1-99) to delay activation of password protection and the screen saver feature. 4. For Mode, select Energy if your monitor is ENERGY STAR® compliant; otherwise select Screen. CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with ENERGY STAR®. 5. (Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box. 6. Click OK. To log in to your console: 1. Press any key or move the mouse. 2. The Password dialog box appears. Type your password, and then click OK. 3. The Main dialog box appears if the password was entered correctly. To remove password protection from your console: 1. From the Main dialog box, click Setup -Security; the Password dialog box appears. Type your password, and then click OK. 2. In the Security dialog box, single-click and press Enter or double-click in the New box. Leave the box blank. Press Enter. 3. Single-click and press Enter or double-click in the Repeat box. Leave the box blank. Press Enter. 4. Click OK to eliminate your password. To enable the screen saver mode with no password protection: 1. If your console does not require a password to gain access to the Security box, go to step 2. —or— If your console is password protected, see the previous procedure, then go to step 2. 2. Select Enable Screen Saver. 3. Type the number of minutes for Inactivity Time (from 1–99) to delay activation of the screen saver. 4. Choose Energy if your monitor is ENERGY STAR compliant; otherwise select Screen. Chapter 3: Local Port Operation 41 Chapter 3: Local Port Operation 41 CAUTION: Monitor damage can result from the use of Energy Mode with monitors not compliant with ENERGY STAR®. 5. (Optional) Click Test to activate the screen saver test which lasts 10 seconds then returns you to the Security dialog box. 6. Click OK. NOTE: Activation of the screen saver mode disconnects the user from a server; no server is selected. The status flag displays Free. To exit the screen saver mode: Press any key or move your mouse. Any previous server connection will be restored. To turn off the screen saver: 1. In the Security dialog box, clear Enable Screen Saver. 2. Click OK. To immediately turn on the screen saver: Press Print Screen, then press Pause. This command only works when the user is connected to a server. Setting the Keyboard Country Code NOTE: Using a keyboard code that supports a language different from that of your DSR fi rmware will cause incorrect keyboard mapping. Sun servers may use key mappings for foreign keyboards. By default, DS appliances send the US keyboard country code to Sun and USB modules attached to servers, and the code is applied to the servers when they are powered up or rebooted. Codes are then stored in the DSRIQ. Issues may arise when you use the US keyboard country code with a keyboard of another country. For example, the Z key on a US keyboard is...
Эта инструкция также подходит к моделям:Ноутбуки - DSR1010 (1.63 mb)