Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Select [Rotate] from View menu or click . 2. Select angle. If [Free] is selected, specify the angle. To select angle. Click here to increase/decreasethe value. The value can be directly entered. W1032Q 3. Click [OK]. BE-0901E-AC-PC. BE-1201B-AC-PC Chapter 5 Editing Embroidery Data Horizontal Flip Flips the image horizontally. W0450Q W0459Q 1. Select [Horizontal Flip] from Edit menu or click . Vertical Flip Flips the image vertically. W0450Q W0460Q 1. Select [Vertical Flip] from Edit menu or click . Point Symmetry Flips the image 180 degrees to the center position of the image. W0450Q W608Q 1. Select [Point Symmetry] from Edit menu or click . Repeat Repeats copying of the image by the specified number. W0450Q W0464Q BE-0901E-AC-PC. BE-1201B-AC-PC Chapter 5 Editing Embroidery Data • The number for repetition is 1 to 100 for both vertical (Row) and horizontal (Column) directions. • The unit for repetition can be set in inches. To use the inch unit, set the length to [inch] on the [Configuration] of Tool menu of the machine controller. (> page 6-24) • The pattern connection can be set in "Direction" as follows: From top left, alternating directions From top left, left to right direction W0716Q W0717Q From bottom left, alternating directions From bottom left, left to right direction W0718Q W0719Q 1. Select [Repeat] from Edit menu or click . 2. Specify the number, interval and direction of repetition. Repeat count in the longitudinal direction The value can be directly entered. Repeat count in the lateral direction Click here to increase/decrease the value. Select the direction of repetition. Sets margins of the sewing area used forthe calculation of the repetition number inthe automatic setting. Select the reference position for spacing. All patterns created in repetition are grouped as a single pattern. Longitudinal distance (Unit: 0.1 mm or 0.01") Lateral distance (Unit: 0.1 mm or 0.01") The number is set automatically so as the number of repetitions to be the maximum within the sewing area. W1033Q 3. Click [OK]. BE-0901E-AC-PC. BE-1201B-AC-PC Chapter 5 Editing Embroidery Data Margin setting with [Auto setting] selected The number is set automatically so as the number of repetitions to be the maximum within the sewing area. • When [Spacing], [Direction], and [Datum] are pre-selected before [Auto setting] is selected, thesetting is performed according to pre-selections. ! [Margin] can be set after [Auto setting] is selected and the margin size you can set is 5 ~ 100mm (0.2 ~ 4.00. in inch) around the sewing area. Margin setting is performed as follows: 1. Select [Auto setting] and click [Margin]. W1034Q 2. Set the vertical and horizontal margin for sewing area. W1035Q Repetition number in horizontal direction. Repetition number in vertical direction. Numbers are up and down if clicked. Numbers can be directly input. 3. Click [OK]. 4. Click [OK]. BE-0901E-AC-PC. BE-1201B-AC-PC Chapter 5 Editing Embroidery Data Resize Resizes the image. W0450Q W1395Q • The available range of resizing is 50 to 200% in both the X and Y directions. • Resizing changes the thread density along with the percentage. 1. Select [Resize] from Edit menu or click . 2. Specify the percentage of resizing. The value can be directly entered. Click here to increase/decrease the value. W1036Q 3. Click [OK]. Delete Stitch Delete a stitch whose length is less than the designated length. Length can be designated from 0.0 to 1.0 mm in units of 0.1 mm. 1. Select [Stitch deletion] from Edit menu. 2. Designate the length of the stitch to be deleted. W1037Q 3. Click [OK]. 4. Deleted result is displayed. Click [OK]. W1038Q BE-0901E-AC-PC. BE-1201B-AC-PC Chapter 5 Editing Embroidery Data Insert or Delete Code Codes of trim, pause and color change can be inserted or deleted by moving the needle to thedesired position. 1. Select [Insert or delete code] from the Edit menu. Needle movement tool bar is displayed. Insert (delete) change 1 step color code 10 step Insert (delete) pause code 100 step Insert (delete) trim code Next (previous) color change pointMove to the indicated position. Next (previous) feed pointConsecutive step forward specified Next (previous) trim codeStep forward specified Next (previous) pause code Stop Step backward specified Consecutive step backward specified W1039Q 2. Select the movement method of needle position. Click either of the following buttons: 1 step Moves the needle position by 1 step each. 10 step Moves the needle position by 10 step each. 100 step Moves the needle position by 100 step each. Next (previous) color change point Moves the needle position to the next (previous) color change point. Next (previous) feed point Moves the needle position to the next (previous) feed point. Next (previous) trim code Moves the needle position to the next (previous) trim code. Next (previous) pause code Moves the needle position to the next (previous) pause code. 3. Move the needle position to the desired position. Click either of the fol...
Эта инструкция также подходит к моделям:Ноутбуки - BE-0901E-AC-PC (8.72 mb)