Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
• For viewing Programs, the software can be run without a dongle. • Without a dongle, some functions, including saving Programs and sending Programs to the Combis cannot be used. Installation of the Convotherm PC-Control Software 1. Insert the dongle in the parallel printer interface (LPT). 2. Install the PC-Control software using the same procedure as the PC-HACCP software. 3. For easier Program startup, place a shortcut to the PC-CONTROL.EXE on the desktop or in the Autostart directory. 3.2 Create a Cookbook on the PC • After starting this program, a list containing all the Program numbers is displayed. • Free and assigned Program numbers are displayed differently in this list. See below. = free Program number = assigned Program number • The Programming window is opened by double clicking on a Program number. • The buttons used in this window are the same as the Keypad icons on the Combi control panel. 10 July 2006 CONVOTHERM PC-Control Operating Instructions 3. CONVOTHERM PC-Control page 2 3.2.1 Multi-Step Programming 1. Open the Programming window: • By double clicking on a free Program number in the Program List. • OR 1) Selecting a free Program number. 2) Left clicking the Edit dropdown menu. 3) Left clicking Create on the Edit menu. • OR by right clicking the Program number. • A dropdown menu with the command Create opens. 2. Select an operating mode by left clicking an icon. • The Cook & Hold mode cannot be selected in the first step and is grey. 3. After selecting the desired operating mode, the default values appear in the entry fields for temperature, time, and CTC (Core Probe Temperature). • Delta-T cooking requires the use of Core Temperature. 4. Accept the default temperature, adjust it with the arrow keys, or input the desired value in the entry field. 5. Click the Time or CTC icon to select shutoff time or temperature. • Accept the default values. • OR change the values with the arrow keys. • OR input values in the entry fields. 10 July 2006 CONVOTHERM PC-Control Operating Instructions 3. CONVOTHERM PC-Control page 3 6. Enter the next step: • Press the New step button. • Fill out the blank cardfile card. 7. Repeat Steps 2-6 as needed for up to 9 Steps per Program. 8. In the Programming window. 1) Enter Programname (up to 49 characters) in the entry field. 2) Enter Category (up to 49 characters) to assign the Program to a product group. 3) Use the down key to view a list containing existing Categories. 4) Click on a Category to select it, or type a new category. 9. Press OK to save the Program, or press Cancel to quit the Program without saving. Changes to the Program are lost. Notes: • A new step can only be entered when the current step is completed. • After complete input of a step, the other steps can be viewed, by clicking on the cardfile card tab with the step number. • A maximum of 9 steps can be entered. • The total time of a Program is displayed under the Program number. 3.2.2 Modify an Existing Program To modify an existing Program, open the Programming window by: • Double clicking on an existing Program Number in the Program List. • OR 1) Selecting a free Program number. 2) Left clicking the Edit dropdown menu. 3) Left clicking Change on the Edit menu. • OR by right clicking the Program number. • A dropdown menu with the command Modify opens. Add a New Step Click New Step. An empty cardfile card is added at the end of the Program. Insert a Step 1. Click on the cardfile card tab before the new step. 2. Click Insert step. 3. An empty cardfile card is inserted and all the steps after the new one are moved back one place. 10 July 2006 CONVOTHERM PC-Control Operating Instructions 3. CONVOTHERM PC-Control page 4 Delete a Step 1. Click the cardfile tab of the step to be deleted. 2. Click Delete Step. 3. The steps are automatically moved forward and renumbered. 3.2.3 Additional Functions These functions can be used in programming: HACCP-Criteria The HACCP criteria can be entered in this window. Notes Comments about the Program can be entered here, e.g. recipe details, product amounts or other tips. Print Click to print a Program. To Program HACCP CRITERIA 1. Click on the HACCP button in the Programming window. 2. Click on CT (core temperature) and / or Oven. 3. If required, change the default values with the arrow keys, or type new values in the entry fields. 4. Click on Time if desired (=Hold time for the core or cooking compartment temperature). 5. Click OK to save or Cancel to quit without saving. To enter Notes 1. Click on the Notes button in the Programming window. 2. Enter text or insert from the clipboard. 3. Click OK or Cancel to quit without saving. To Print 1. Click on the Print button in the Programming window. 2. Enter the printer information. 3. Click OK or Cancel to quit without saving. 10 July 2006 CONVOTHERM PC-Control Operating Instructions 3. CONVOTHERM PC-Control page 5 3.2.4 Delta-T Cooking, Cook&Hold Delta-T and Cook&Hold are programmable with the CONVOTHERM PC-Control...
Эта инструкция также подходит к моделям:Ноутбуки - Convotherm PC-HACCP (244.25 kb)