Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Compliance with EMF This product complies with all applicable standards and regulations regarding exposure to electromagnetic fields. 2 EN 2 Your Bluetooth stereo headset Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at With this Philips wireless on-ear headset, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music; • enjoy music on non-Bluetooth devices with an audio cable. What's in the box Philips Bluetooth stereo headset SHB9150 USB charging cable Audio cable Quick start guide Other devices A mobile phone or device (e.g. notebook, PDA, Bluetooth adapters, MP3 players etc) which supports Bluetooth and is compatible to the headset. Overview of your Bluetooth stereo headset dceba a Call/Music button b Microphone c Audio input jack d Charging slot e Volume/Track control EN 3 Get started Charge your headset Note ••Before you use your headset for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. ••Use only the original USB charging cable to avoid any damage. ••Finish your call before charging the headset, as connecting the headset for charging will power the headset off. Connect the supplied USB charging cable to: • the USB connector of the headset and; • USB power source. »»LED turns white during charging and turns off when the headset is fully charged. Tip ••Normally, a full charge takes 3 hours. ••When your battery is empty, you can carry on listening music with an audio cable. Make sure the headset is off (and not in idle mode) before using this audio cable. Pair the headset with your mobile phone Before you use the headset with your mobile phone for the first time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headset and mobile phone. The headset stores the last 8 devices in the memory. If you try to pair more than 8 devices, the earliest paired device is replaced by the new one. There are two ways to pair your headset with your mobile phone: • Manual pairing • NFC pairing Manual pairing 1 Make sure that the mobile phone is turned on and its Bluetooth feature is activated. 2 Make sure that the headset is fully charged and turned off. 3 Press and hold until the blue and white LED flashes alternately. »»The headset remains in pairing mode for 5 minutes. 4 Pair the headset with the mobile phone. For detailed information, refer to the user manual of your mobile phone. NFC pairing 1 Make sure that the mobile phone is turned on. 2 Make sure that the headset is fully charged and turned off. 3 Press and hold until the blue and white LED flashes alternately.. 4 Make sure you turn on the NFC function on your phone and your phone’s screen remains active. 5 Place your phone over the headset so that the NFC detection area of each device can touch each other. Note ••Make sure your mobile phone has the NFC feature available and switched on. ••Make sure your mobile phone is not in standby mode. ••Pairing with NFC is only suitable for Android mobile operating system 4.2 or above. ••Refer to the user manual of your mobile phone to identify its NFC detection area. EN The following example shows you how to pair the headset with your mobile phone. 1 Activate the Bluetooth feature of your mobile phone, select Philips SHB9150. 2 Enter the headset password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password. SettingsDevices FoundSelect10:36SettingsConnectivitySelectBack10:37Enter Password**** 0000SettingsBluetoothSelectBack10:35ConnectivityAddBluetoothdeviceBackPhilips SHB9150 EN 4 Use your headset Connect the headset to a Bluetooth device 1 Turn on your mobile phone/Bluetooth device. 2 Press and hold to turn the headset on. »»The blue LED flashes. »»The headset is reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headset tries to reconnect to the second last connected device. Tip ••If you turn on the mobile phone/Bluetooth device or activate the Bluetooth feature after turning on the headset, you have to reconnect the headset and mobile phone/Bluetooth device manually. Note ••If the headset fails to connect to any Bluetooth device within range in 5 minutes, it will switch off automatically to save the battery life. Automatic power saving If the headset fails to connect any Bluetoothdevice within range in 5 minutes, it powers down automatically to save the battery life. Manage your calls and music Call/Music button Task Operation Sound or LED indicator Turn the headset on. Press and hold for 1 second. • 1 short beep • 3 white flashes: battery low < 25% • 2 white flashes: battery level < 50% • 1 blue flash: battery level > 50% Turn the headset off. Press and hold for 4 seconds. • 1 long beep • 1 long white flash Play or pause m...
Эта инструкция также подходит к моделям:Наушники - SHB9150WT/00 (637.76 kb)
Наушники - SHB9150RD/00 (637.76 kb)