Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Attention should be drawn to the environmental aspects of battery disposal. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Notice for the European Union Hereby, Philips Consumer Lifestyle, BU Communications, Headphones & Accessories, declares that this Philips digital wireless headset SHD9200 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product has been designed, tested and manufactured according to the European R&TTE Directive 1999/5/EC. EN 2 What’s in the box (Fig. A) 1) Headphones 2) Docking station 3) AC/DC adaptor 5V 300mA 4) RCA to RCA cable 5) 2 x AAA rechargeable NiMH batteries 6) Quick start guide EN 3 Get Started Note ••Before using the headphones for the first time, charge the supplied batteries for at least 8 hours. Only rechargeable NiMH batteries can be charged. Use the batteries (capacity over 700mAh) to ensure the 20 hours' operating time from fully charged. ••AAA alkaline batteries can be used to operate the headphones. ••Use Philips power adaptor only. ••If no audio input for over 10 minutes, the transmitter automatically turns to standby. ••The docking station does not transmit audio signal during charge. ••Digital input only supports PCM (pulse code modulation). 1 Install/Replace the supplied batteries (Fig.B). 2 Power on the transmitter (Fig.C). 3 Power off the headphones and charge the headphones (Fig.D). 4 Press INPUT to select ANALOGUE or DIGITAL mode (Fig.E). • In ANALOGUE mode, connect the audio device to LINE IN sockets, then adjust ATT (Attenuation of audio input signal) (Fig.F). • For portable CD player, MP3 player or other devices with 3.5mm triport socket output, connect with RCA to RCA cable (provided) and RCA to 3.5mm plug adaptor (not provided), then switch ATT to 0dB. • For Hi-Fi, TV, DVD player or other devices with RCA socket output, connect with RCA to RCA cable (provided), then switch ATT to -8dB. • In DIGITAL mode, connect the digital audio device to DIGITAL IN COAXIAL socket with coaxial cable (not provided) (Fig.G). 1 Press and hold on the right headphone for 2 seconds to power on the headphones (Fig.H). 2 Touch +/- on the right headphone to adjust the volume (Fig.I). 3 Press the 3D SOUND button on the right headphone to activate/deactivate the 3D sound function (Fig.I). »»The LED on the transmitter turns on. Tip ••You can also adjust the volume on the audio device. EN start guideLL2 sec EN 4 LED indications Transmitter Headphones Situation Analogue/Digital Charging 3D sound LED White Red White Red Searching Fast blinking --- --- Fast blinking Connection established Blinking --- --- Blinking Standby Off Off --- --- Low battery --- --- --- Fast blinking Charging Off Blinking --- --- Fully charged --- On --- --- Non NiMH batteries --- Off --- --- 3D sound activated --- --- On --- 3D sound deactivated --- --- Off --- EN 5 Sound indications Situation Sound signal Low battery One “Beep” per 10 seconds Turn the volume to maximum/minimum level Alert tone “Beep” EN 6 Product information Transmitter System Radio Frequency (RF) Modulation MSK digital Carrier frequency 2,400 - 2,483.5 MHz Channels 15 (auto-switching) Radiated output power 10 mW Effective transmission range Approx. 100 meters (depending on ambient conditions) Input Level 800 mV (0 dB); 2 V (-8 dB) Power requirements DC 5 V; 300 mA (from the supplied AC power adaptor) Headphones Playback frequency range 17 - 24,000 Hz Signal/Noise ratio 89 dB Nominal Distortion < 0.5% THD (Total Harmonic Distortion) Channel Separation 60 dB Impedance 32 ohm Power Requirements 2 x 700 mAh rec...