Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Switchable 6 dB/octave bass roll-off and 12 dB/octave bass cut provide flexibility in dealing with proximity effect. The microphone capsule is shock mounted with an easily removable wire mesh grille. The smooth triangular shape of the microphone is easier to hold than normal circular cross-section designs and is stable when the microphone is placed on a surface. The lightweight body is die cast zinc alloy and has a dark matte finish for minimum reflection and glare. Specifications Transducer type: Prepolarized backplate condenser Frequency response: 20 - 22 kHz Polar pattern: Hypercardioid Power requirements: 9 - 52 Vdc Impedance: 200 ohms Recommended load impedance: >2000 ohms Output connector: XLR-M Sensitivity: 6 mV/Pa; -45 dB (re 1 V/Pa) Switchable bass roll-off: 6 dB/octave Switchable bass cut: 12 dB/octave Sound pressure level for 1% (3%) THD: 140 dB SPL (149 dB SPL) Environmental operation: Temperature: -10°C to +65°C Maximum relative humidity at +20°C: 90% Size: Maximum diameter: 2.1 in. (53 mm) 7.4 in. length (187.5 mm) Net weight: 9.8 oz. (276 g) Shipping weight: 23.9 oz. (676 g) Accessories included: SA 41/1 stand adapter Optional accessories: W 23 foam windscreen Features • Broad high frequency rise (4 dB) for added presence • Hypercardioid pattern for added immunity to feedback • Switchable low frequency cut and roll-off • Internal elastic suspension for reduced handling noise • Light-weight die cast metal body with dark matte finish • Replaceable grille assembly • Universal phantom powering Architects and Engineers Specifications The microphone shall be a backplate condenser type with a be no greater than 9.8 oz. The microphone shall operate on hypercardioid pickup pattern. Sensitivity shall be no less than phantom powering over the range from 9 to 52 Vdc. The 6 mV/Pa, and the maximum operating level for 3% THD shall be microphone shall include the following low frequency options: no less than 149 dB SPL. The maximum diameter of the switchable bass roll-off of 6 dB/octave and switchable bass cut microphone shall be no greater than 2.1 in., and the microphone of 12 dB/octave. The microphone shall be the AKG Acoustics length shall be no greater than 7.4 in. Microphone net weight shall Model C 5900. AKG is constantly improving and modifying therefore, specifications are subject to change Graphical Data or consequential damages. However, the limitation of any right or remedy shall not be effective Limited Warranty where such is prohibited or restricted by law. Simply take or ship your AKG product prepaid to our Valid only in the United States. AKG Acoustics warrants AKG products against defects in material service department. Be sure to include your sales slip as proof of purchase date. (We will not repair or workmanship for a period of two years from the date of original purchase for use, and agrees to transit damage under the no-charge terms of this warranty.) Note: No other warranty, written or oral repair or, at our option, replace ...