Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
3) Connect the mini-plug audio signal cable from the phone out jack on the receiver to the wireless mic jack on amplifier 4) Attach Antenna by screwing it into socket on top of receiver. Phone Out Jack Wireless Mic Jack 5) Turn the Power ON/OFF switch to the ON position (The LEDindicator will light) HELPFUL HINTS A) If the selected channel is noisy, switch both the transmitter andreceiver to the other channel. C) Low ceiling fluorescent lighting, overhead telephone lines, or close proximity to metal fences can all cause static. If this occurs, try a slight change of position and/or try changing frequencies. D) When the battery voltage drops below 6V, the LED indicator will go out. This means you need a new battery. E) Be sure to turn off the power whenever the units are not in use, and remove the batteries if the units will be out of service for a long time. NOTE: There are no user-adjustable parts inside the transmitter orreceiver Do not attempt to open or make any adjustments. BELT CLIP A detachable belt clip is included for convenience. Slide the tapered end of the belt clip into the grooved area located on the back of the unituntil it clicks into place. MOUNTING The receiver can be mounted to some AmpliVox units by means of the supplied mounting bracket or velcro self-adhesive patch. a product of 1-800-AmpliVox (800-267-5486) FAX 847-498-6691 3149 MacArthur Blvd. Northbrook. IL 60062 1 -800-AmpliVox ...
Эта инструкция также подходит к моделям:Наушники и микрофоны - VHF S1600 (341.39 kb)