Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Condenser Polar Pattern........................................Continuously-variable Frequency Response ....................................... 90Hz -17KHz Sensitivity .........................................-32dBV (25mV) @ 1 Pa Impedance.............................................................120 ohms Maximum SPL.................................120dB, 1% T.H.D., 1KHz Self Noise ...................................................................18dBA Power Requirements............................P12, P24, P48, 4mA Connector...................................................3-pin XLRM-type Polarity................................ Positive pressure on diaphragm corresponds to positive voltage on pin 2 relative to pin 3 at XLR3M-type connector. Finish ......................................Durable matte-black urethane or white (220VPW) Dimensions .....................................................(See drawing) Net Weight [Mass] ......................................... 3.9oz [0.11Kg] Packaged Weight [Mass] ...............................5.0oz [0.14Kg] RF Immunity......................... Meets or exceeds EN55103-2, E1, E2, E3 and E4 RoHS Compliant †Specifications subject to change without notice. Included Accessories ..............................2 rubber bushings, hex nut and washer Cardioid Figure-of-eight Architects’ and Engineers’ Specifications The microphone will be an inconspicuous, continuously- variable polar pattern, button-style, condenser boundary microphone designed for surface installation. The microphone will have a continuously-variable polar pattern. The sensitivity of the microphone will be –32dBV (25mv) @ 1Pa. The frequency response will be 90Hz-17KHz. The impedance of the microphone will be 120 ohms. The self- noise will be 24dBA. The maximum SPL will be 120dB. The microphone will include an integral 80Hz, 12dB/octave high-pass filter to improve intelligibility. The microphone will have a 3-pin XLRM-type connector allowing for bottom exit. The microphone will operate from P12, P24 or P48 standard phantom power consuming 4mA. The microphone element and electronics will be enclosed in a radio frequency resistant housing meeting or exceeding EN55103-2. The 220VP will be 3-3/8" [85mm] long, 1-1/8" [28mm] in diameter and stands 3/4" [20mm] above boundary. The net weight [mass] will be 3.9oz [0.11Kg]. The packaged weight [mass] will be 5.0oz [0.14Kg]. The 220VP will have durable matte-black urethane or matte-white finish. The Astatic model 220VP or 220VPW is specified. Two-Year Limited Warranty Astatic Commercial Audio Products hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs Astatic will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim. This warranty excludes exterior fini...
Эта инструкция также подходит к моделям:Наушники и микрофоны - 220VP (789.99 kb)