Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Blue s, модель Dragonfly Microphones

Производитель: Blue s
Размер: 1.22 mb
Название файла: 6f059e25-5d4d-4fbd-9d1b-058b8fda2c6e.pdf

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


The Dragonfly’s electronics are Class A discrete, with transformerless output. In plain English, this means that the sound which has arrived at the diaphragm and has been converted to electrical energy (transduced) is then amplified as accurately as possible, with minimal coloration and absolutely no integrated circuits (AKA — “IC’s”) in the signal path. Thus, the Dragonfly’s overall sonic character is superbly detailed and pleasing to the ear, making it an ideal microphone for recording vocals, drums and percussion, electric guitar, bass and any acoustic instrument including “difficult” sources like saxophones and stringed instruments. To get the most out of this, or any quality microphone, it is essential to pair it with a good microphone preamplifier. Most professional recordists prefer to have outboard preamps on hand, and will choose solid-state or vacuum tube models based on their unique character- istics. To maintain the integrity of your signal, try using Blue’s Cranberry, Blueberry or Kiwi high-definition mic cable along with Blue’s outstanding Class-A vacuum tube mic preamp, Robbie (left). And, whenever possible, connect your pre’s output directly to your recorder or A/D converter, bypassing the mixing board and any unnecessary components. The Dragonfly includes the Series 2 shock. To mount the Dragonfly on a mic stand, you may find it easiest to 1) loosen the boom stand arm or threaded end of the mic stand, 2) grasp the mic and shockmount assembly in one hand, and 3) screw the mic stand threads into the Dragonfly mount. This procedure will assure that the elastic shockmount bands stay in place and eliminates any pos- sibility of damage to the mic. The swivel mount can be angled over 180° by adjusting the thumbscrew. To secure the delicate capsule during transport and storage, two set screws are provided. These screws go into the solid metal ring around the circumference of the spherical grille, and should be in place when you first take the mic out of its case. Remove them before using the Dragonfly, and replace them at the end of the session. The Dragonfly requires +48V phantom power, which is provided by most mic preamps, mixing consoles, or separate phantom power supplies. It is important to note that some units, though rated at 48 volts, may supply insufficient or unstable phantom power, which can result in distortion and/or degraded performance when used with the Dragonfly. To avoid damage to audio components when connecting phantom power, follow this simple procedure: 1) Turn down the mic preamp gain, headphones, and your studio monitors; 2) Connect microphone cable to the Dragonfly and microphone input jack; 3) Turn on phantom power; 4) Turn up the mic preamp gain, etc. To disconnect or re-route the Dragonfly: 1) Turn down the mic preamp gain, headphones, and your studio monitors; 2) Turn off phantom power and wait ten seconds before disconnecting the mic. Once the Dragonfly is on the stand and powered up, make sure that the active, on-axis side of the capsule (the shiny hemisphere of the grille) is facing the desired source. For example, if you are speaking into the mic, the shiny hemisphere will be in front of your mouth and the solid metal ring around the circumference of the grille will be aligned vertically, with the two screw holes on top. The Dragonfly is a cardioid mic and is designed to reject off-axis sound arriving at the back of the capsule (the dull metal hemisphere). And now, here are some recording tips that will allow you to get the most out of the Dragonfly. Vocals A little-known secret in the recording world is that vocalists love singing into beautifully engineered microphones like the Dragonfly. Put it in front of any singer and you’re guaranteed to get a truly inspired vocal performance. For a “big” vocal sound, position the vocalist within one to four inches of the capsule (be sure to use a quality pop filter like Blue’s The Pop). Tilt the capsule up (towards the forehead) for more projection and head tone, straight on at the mouth for maximum brightness and intelligibility, or down towards the chest for more robust full lows and smoother highs. Electric Guitar The Dragonfly is an excellent mic for any clean amp sound, ranging from bright rhythm chords to warm jazzy tones. Rotate the capsule towards the center of the speaker to capture more highs, or turn the capsule toward the edge of the cone for a fuller sound with more low end. For overdriven or distorted tones, move the mic towards the outer edge of the cone, or back it away from the amp a foot or more to add a little room sound and soften the extreme high end. Give the Dragonfly a try on electric bass, too! Acoustic Guitar Large diaphragm mics require careful placement when used on acoustic guitar, but the Dragonfly’s clarity and superb transient response are well- suited to this job. For a balanced sound with plenty of sparkling high end, place the microphone facing the guitar neck, right where the neck joins t...

Эта инструкция также подходит к моделям:
- ()

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории